03-03-2009, 01:21 PM | #11 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: controller
Rebuilt controllers DO NOT have a very good reputation. Next one you buy make sure its a new one like an Alltrax AXE. Check your armature and feild to see it they have continuity....not likely but it won't hurt to check.
What is your voltage? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-03-2009, 01:21 PM | #12 |
Not Yet Wild
Join Date: Mar 2009
Posts: 8
|
Re: controller
Thanks, If thats what I might part it out and buy something else
|
03-03-2009, 01:32 PM | #13 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: controller
Disconnect the 4 wires from the motor, labeling them of course, and measure for shorts or any resistance between the posts on the motor and the case of the motor.
There should be NO resistance between the case and any of the posts unless there is a large amount of carbon encased inside the motor in the "brushes end". The carbon can usually be cleaned out. |
03-03-2009, 01:37 PM | #14 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,284
|
Re: controller
Any chance this cart has seen a hurricane recently?
|
03-03-2009, 02:15 PM | #15 |
Not Yet Wild
Join Date: Mar 2009
Posts: 8
|
Re: controller
Yes, but was in the garage. No damage to it and it did not get wet
|
03-03-2009, 02:41 PM | #16 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: controller
How many caps do you have on each battery?
|
03-03-2009, 08:35 PM | #17 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,284
|
Re: controller
|
09-26-2013, 06:56 AM | #18 |
Not Yet Wild
Join Date: Sep 2013
Posts: 6
|
Re: controller
I have a 2006 bad boy buggy either I have a bad contoller or a bad contractor, don't want to buy both does anyone know what the coil voltage on the contractor should be?
|
09-26-2013, 08:27 AM | #19 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: controller
Please start your own thread. Hijacking a thread with questions about a different subject is considered bad forum manors.
|
09-26-2013, 08:54 AM | #20 |
Not Yet Wild
Join Date: Sep 2013
Posts: 6
|
Re: controller
Sorry - just started!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
400 amp controller | Electric EZGO | |||
Controller 101 | Electric EZGO | |||
controller help | Electric EZGO | |||
pds controller | Electric EZGO | |||
Need a pds controller | Golf Carts and Parts |