DPI charger question

[kernal]

Originally Posted by rngilliland

BTW, you are the first to report having the new version of this charger far as I know. I'm sure we would all like to hear about your experiences with it over time.

I'm not the thread starter but I have the Gen IV 48 volt charger. I use it on a four US Battery 12 volt pack. It works fine and I am using mode 7.

The instructions are not very good. I called them when I got my charger because the instructions were written for switches and leds that were horizontal but they are vertical on this charger. They have added to the instructions on their website since I talked to them but it still isn't very clear. The section about setting the mode and what the flashing leds mean should be rewritten.

I think the instructions are still wrong about which vertical switch number matches the horizontal switches. The number one switch is the bottom switch
and number five is the top switch. The leds are the same (number one is the bottom led).

If you are facing the front of the charger and lay it on the right side, when setting the mode, then you can use the horizontal left to right settings without converting to up and down. The main thing is to make sure the correct leds flash when you plug the charger in. Then you know you are in the correct mode.[/QUOTE]

Good to know!! Thanks for jumping in.

[Jmzvet]

Good info. Seems to be charging fine on the factory setting of all Zeros.