2009 Precedent Excel speed upgrade

[PingEye3]

Originally Posted by KELROY

Thanks for all of the info, guys. Sounds like the Alltrax is the guaranteed solution. Correct me if I'm wrong, the adjust the speed to code 4 requires a visit to a technician?

And that spends at leat $100-$125 of good money that could be put toward the XCT. Go for the Alltrax.

[NoleFan4Ever]

Although I like the SP4 and have used it on every cart, as PE3 stated, if you can cover the XCT costs, it will be WELL worth it!!

[KELROY]

Thanks everyone for the great info.

[hdnik]

Does the Obb have to be bypassed when switching to an alltrax controller?

[NoleFan4Ever]

Originally Posted by hdnik

Does the Obb have to be bypassed when switching to an alltrax controller?

(OBC) No.

[GeneralLee]

I have a 2012 PH Precedent cart grey controller. My cart is only going 15 my neighbor has the computer he hooked it up it says it has speed code 4 in it.
Does anyone on here know what all the settings should be in the controller to maximize speed.

[TahoeDawgZ71]

Originally Posted by GeneralLee

I have a 2012 PH Precedent cart grey controller. My cart is only going 15 my neighbor has the computer he hooked it up it says it has speed code 4 in it.
Does anyone on here know what all the settings should be in the controller to maximize speed.

There's something else wrong with your cart. Speed setting 4 will allow your cart to travel up to 19.6 MPH before the electronic braking starts to slow itself down. If your cart can't reach that speed, something else is causing it. Weak batteries, low tire pressure, bad MCOR, improper front end alignment are just a few suggestions on what you need to check.


Essentially what I'm saying is that Speed Setting 4 will not "Make" your cart do 19.6 MPH. Speed Setting 4 will "Allow" for 19.6MPH if the rest of your cart can get it there.