|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-09-2018, 02:48 PM | #11 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: EZGO 36 volt series issues
It is a new motor from Nivel. Redhawk was out of stock of the Admiral.
I will go out and double check all connections and also I am pretty sure the "excessive" heat is only in one direction, but will confirm and also note which cables. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-09-2018, 03:16 PM | #12 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: EZGO 36 volt series issues
In reverse no cables seem to be getting even warm to the touch.
In forward............A2 on controller to motor gets very hot and M- to top of F&R gets warm. Other cables are normal to the touch. |
11-10-2018, 11:29 AM | #13 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: EZGO 36 volt series issues
Charged batteries overnight and results are still the same.
|
11-10-2018, 12:06 PM | #14 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: EZGO 36 volt series issues
I'm at a complete loss. The current is the same in each conductor, regardless of direction, for a series circuit. The only way I can imagine conductors getting hot only in one direction is a bad FNR, and that doesn't explain motor conductors.
Sorry |
11-10-2018, 01:48 PM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO 36 volt series issues
Half speed reverse?
|
11-10-2018, 02:22 PM | #16 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: EZGO 36 volt series issues
markm you must be a dealer with RedHawk to get parts. You got a lot of carts you fix. I guess you repair carts?
|
11-12-2018, 10:16 AM | #17 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: EZGO 36 volt series issues
JohnnieB reverse seems to be moving pretty good on the jack stands and doesn't appear to be half speed, but I haven't driven it off the stands.
Rib33024 yes I am a shop that does repairs and a Redhawk dealer. |
11-12-2018, 04:23 PM | #18 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: EZGO 36 volt series issues
Any other suggestions?
|
11-13-2018, 03:14 PM | #19 |
Getting Wild
Join Date: Sep 2009
Location: Aubrey, TX
Posts: 88
|
Re: EZGO 36 volt series issues
We are at a loss here. Anything else we should be checking?
|
11-13-2018, 03:22 PM | #20 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: EZGO 36 volt series issues
Did you try the following:
Post #2. You can reverse any two cables at the motor or FNR. Post #15. Try jumping the 1/2 speed reverse. The controller doesn't know or care whether it's F or R. For that matter, neither do the FNR or motor. |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO series cart issues - won't move | Electric EZGO | |||
EZGO 480 ST Solenoid/Volt Reg Issues | Gas EZGO | |||
36 Volt EZGO TXT Series Cart | Golf Carts and Parts | |||
36 volt series throttle issues | Electric EZGO | |||
1997 EZGO 36 volt Series just clicks | Electric EZGO |