1997 DCS not getting power at key switch

Pedracer97 · 12-15-2018, 03:53 PM

This cart is killing me as i'm electrically challenged. The resistor is smoking hot when i went to do these test after it has been sitting for a few days with nothing on or plugged in.

The battery pack is reading 38.4 volts.

The B+ (with the multimeter on the Neg) was getting 37.9. ( now its not getting anything after doing other tests)

The pin 10 (red/yel with the multimeter on the Neg) is getting 38.4

The pin 9 (Red with the mulitmeter on the Neg) is getting 38.4

The pin 5 (green with the mulitmetet on the neg and the acc pressed) is getting 0 and the soleniod is not clicking.

No voltage on the small terminals of the solenoid.

scottyb · 12-15-2018, 04:06 PM

DCS diagnostics

Pedracer97 · 12-15-2018, 04:16 PM

Thats the guide I was following and got to step 4 and no solenoid click and nothing on step 5. I jumped the forward switch ( cut the switch off and twisted the wires together) so looking at the diagram maybe the key switch is bad or the run-tow switch is bad?

12-15-2018, 03:53 PM	#11
Pedracer97 Not Yet Wild Join Date: Oct 2018 Location: Florida Posts: 14	Re: 1997 DCS not getting power at key switch This cart is killing me as i'm electrically challenged. The resistor is smoking hot when i went to do these test after it has been sitting for a few days with nothing on or plugged in. The battery pack is reading 38.4 volts. The B+ (with the multimeter on the Neg) was getting 37.9. ( now its not getting anything after doing other tests) The pin 10 (red/yel with the multimeter on the Neg) is getting 38.4 The pin 9 (Red with the mulitmeter on the Neg) is getting 38.4 The pin 5 (green with the mulitmetet on the neg and the acc pressed) is getting 0 and the soleniod is not clicking. No voltage on the small terminals of the solenoid.

12-15-2018, 04:16 PM	#13
Pedracer97 Not Yet Wild Join Date: Oct 2018 Location: Florida Posts: 14	Re: 1997 DCS not getting power at key switch Thats the guide I was following and got to step 4 and no solenoid click and nothing on step 5. I jumped the forward switch ( cut the switch off and twisted the wires together) so looking at the diagram maybe the key switch is bad or the run-tow switch is bad?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
1997 Club car Ds key switch wiring	Gas Club Car
1997 EZGO TXT FNR switch	Electric EZGO
1996 804 with 1997 350 cc has no power	Gas EZGO
Lack of power club car 1997 (gas)	Gas Club Car
1997 cc 48v low power	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum