|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-09-2019, 05:08 PM | #1 |
Guest
Posts: n/a
|
First cart and need to verify type of motor and controls for upgrade
Good afternoon,
New guy to the forum and to golf carts here... I recently purchased a club car to use at my hunt camp in Georgia and it didnt take long to smoke the motor going up and down the ridges and bottoms there. Im trying to order a new control/motor package and I would like to run it by all you guys to verify what I think I have now as I am completely new to the golf cart world. Here is what I know; MY cart is a 2001 club car ds Serial number is A0105 986544 I believe I have a series set up due to the following: The motor is a 3.1 hp with 4 lugs all matching size labeled A1 A2 S1 S2 there is no speed sensor wiring exiting the motor case There are heavy guage motor current carrying cables attached to the FNR switch, It has an Alltrax AXE controller It has an MCOR module for the speed sensing The OBC has been bypassed it is a 48V cart Its lifted and has larger offroad tires and will be used exclusively for hunting traveling up steep grades and rough terrain and speed more than 8 mph really isnt needed....but lots of torque is....without smoking anything else. So here is what I think I need. A larger high torque series motor approx. 10 hp An upgraded Alltrax SR controller capable of 600 amps An upgraded heavy duty solenoid for max amp load replace the piece of crap FNR switch with interlocked F/R contactors selected with a rocker switch 2g cable package to replace the 4g that is there currently ANy and all input, information, suggestions, corrections will be highly appreciated. I am getting ready to spend about $1500 dollars on all of this and I want to make sure I am getting what I need. Thanks for looking. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-09-2019, 06:02 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: First cart and need to verify type of motor and controls for upgrade
Sounds right to me.
SR control, SW202, @g cables, and MOT-A1 or better should do you solid. |
09-09-2019, 06:19 PM | #3 |
Guest
Posts: n/a
|
Re: First cart and need to verify type of motor and controls for upgrade
Thanks for all your help Scotty....l just placed the order from you guys...
|
09-10-2019, 12:02 AM | #4 | |
Gone Wild
Join Date: May 2016
Posts: 373
|
Re: First cart and need to verify type of motor and controls for upgrade
Quote:
Get the HD reversing contractor if you haven’t already........ |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Brake upgrade for EZGO with OEM type 4" lift | Lifted Golf Carts | |||
what controls motor speed.. | Electric EZGO | |||
Verify my Yamaha Golf Cart | Gas Yamaha | |||
Upgrade old Taylor-Dunn controls. | Electric golf carts | |||
What controls charge amps on OBC type system | Electric Club Car |