|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-02-2020, 09:27 AM | #1 |
Getting Wild
Join Date: May 2016
Location: Atlanta, GA
Posts: 129
|
22-32 AWG Wire Fork Connectors?
Anyone know where to buy wire connectors (fork or ring) for super small wire in the 22-32 AWG range? Can't seem to find them on Amazon.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-02-2020, 10:58 PM | #2 |
Gone Wild
Join Date: Aug 2016
Location: Prescott, AZ At a really nice Country Cub
Posts: 242
|
Re: 22-32 AWG Wire Fork Connectors?
https://www.ebay.com/itm/18-22-GAUGE...-/292130709738
Try this place on eBay I purchased some terminals from them. The site was recommended to me by Sergio during his leaf build. Sent from my iPad using Tapatalk |
11-02-2020, 11:40 PM | #3 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,226
|
Re: 22-32 AWG Wire Fork Connectors?
If you are worried about getting a good connection with the crimp remove the plastic protector and crimp and solder. For added protection use a piece of heat shrink where the plastic protector was.
|
11-03-2020, 12:56 AM | #4 |
Gone Wild
Join Date: Aug 2016
Location: Prescott, AZ At a really nice Country Cub
Posts: 242
|
Re: 22-32 AWG Wire Fork Connectors?
I looked around to many specialized web sites for 32 gage forked wire connectors. I could not find any that went that small. What I would do is use the 22 gage fork connectors fold the bare wire in half and crimp and solder using heat shrink tubing. Just like walterm6 said in his post.
Sent from my iPad using Tapatalk |
11-03-2020, 09:53 AM | #5 | |
Getting Wild
Join Date: May 2016
Location: Atlanta, GA
Posts: 129
|
Re: 22-32 AWG Wire Fork Connectors?
Quote:
Walter - Thanks for chiming in! I almost DM'd you. It was actually your picture from your Lifepo4 setup that made me think you had a fork or ring connector for your BMS wires. I could see the heatshrink and its what made me think that. You wouldn't happen to have a closeup of your LIFEPO4 pack with the BMS wires attached? I've never connected a BMS before and the english is a little broken on the wiring instructions. A picture would go a long way to make sure I don't incorrectly connect something. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Wire Connectors | Electric Club Car | |||
G29/ Drive PTV wire connectors | Gas Yamaha | |||
Romex Wire, Crimp Connectors? | Electric EZGO | |||
Picture of Governor Fork? | Gas EZGO | |||
Wire connectors | Electric EZGO |