|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-01-2021, 07:34 AM | #1 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Front seatback recover suggestion? Custom Quality Covers for Precedent
Three carts sitting here: two passenger Precedent, two passenger older DS, four passenger newer DS. I ordered seat covers for all of them from eBay seller Custom Quality Covers and their customer service suuuuuuucks. Zero install instructions, nearly zero support afterwards. Hands-on quality is good, fit is good on seat bottom and DS single seat back. Fit is just OK on individual rectangle seat backs. The problem is that the covers aren't completely rectangular, and the top and bottom have a slight arc to them.
Anyway, the Precedent seat back cover is designed to staple to the plastic back cover. There are no provisions to cover the stapled area of the new seatcover, which will look like poo. Any suggestions on cleaning up the look of the rear of the seat? https://www.ebay.com/str/Golf-Carts-...p2047675.l2563 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-01-2021, 09:28 AM | #2 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
https://www.ebay.com/itm/Club-Car-Pr...72.m2749.l2649
You can find them for less if you look around... |
03-01-2021, 09:34 AM | #3 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
So you're suggesting I staple to the existing cover, then go over THAT with the second one?
|
03-01-2021, 09:41 AM | #4 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
That's what I did..Looks great and finishes it off...It covers the whole back and the seat back bolts hold it in place...Like this...
https://www.golfcartking.com/club-ca...MaAg3rEALw_wcB |
03-01-2021, 11:22 AM | #5 |
Gone Wild
Join Date: Apr 2020
Location: Hurricane, Utah
Posts: 2,799
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
FYI in case you don't have a stapler-I had 2 motorcycle seats to replace the covers on and took them to my upholstery guy who wanted $70 a seat to install. Being the cheap SOB that I am I went to HF and picked up a couple of air staplers and staples for under $100 and installed both covers in less than an hour (I am not an upholstery guy but they weren't that tough).
3 circles and a snap for the HF staplers |
03-01-2021, 12:31 PM | #6 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
That cover is exactly what I need. Simi, I have a HF stapler, it's a life saver.
|
03-01-2021, 01:00 PM | #7 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
Another fyi....Stainless staples will rust after a while as there is a percentage of iron in them...I use monel staples...They have a high nickel content along with copper and will never rust...They are made for marine use..I am on the east coast of FL where everything rusts...
|
03-01-2021, 01:19 PM | #8 | |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Front seatback recover suggestion? Custom Quality Covers for Precedent
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone ever use Custom Quality Covers? | Design Center | |||
Advice for a rookie doing staple on seat covers (front & rear) Precedent? | Electric Club Car | |||
limo front seatback supports | Electric EZGO | |||
CC precedent front/rear seat covers | Gas Club Car | |||
Precedent Custom Front Light Ideas | Electric Club Car |