|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-31-2013, 09:59 AM | #1 |
Gone Wild
Join Date: Sep 2012
Posts: 245
|
Help with king pin removal
I have some slop in my spindle, and want to replace the bushings and king pin if necessary. I took the bolt out and now cannot get the king pin out. I don't see any roll pins holding it in. I have tapped on it pretty hard from both the top and bottom but its not budging. I figure I am probably missing something. Any help would be greatly appreciated. I tried looking at the manuals in the stickys, but I could not find a manual for my cart..... 1998 TXT
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-31-2013, 10:24 AM | #2 |
Not Yet Wild
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
|
Re: Help with king pin removal
Bigger hammer or a press. To my knowledge there is nothing that holds it in there.
|
07-31-2013, 01:32 PM | #3 |
Gone Wild
Join Date: Sep 2012
Posts: 245
|
Re: Help with king pin removal
Thanks! It did need a bigger hammer!
|
07-31-2013, 01:50 PM | #4 |
Not Yet Wild
Join Date: Dec 2011
Location: westmemphis, Ar
Posts: 72
|
Re: Help with king pin removal
Haha! Nice! Lil persuation always helps!!
|
07-31-2013, 05:45 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Help with king pin removal
Links:
Owner's, Parts, and Service Manuals: http://www.buggiesgonewild.com/elect...g-manuals.html Dana Axle: http://www.buggiesgonewild.com/attac...5-28148g01.pdf |
|
|
Similar Threads | ||||
Thread | Forum | |||
king pin bushing removal | Electric Club Car | |||
king pin removal | Gas Yamaha | |||
1991 G-9 king pin removal | Gas Yamaha | |||
King pin removal | Gas Yamaha | |||
king pin removal | Gas Yamaha |