Best plug and go key swap?

[sleepyluke]

We have now passed a city ordiannce to allow carts on the streets other than the close neighborhood. My problem is that when I go the the grocery store, I anticipate half of the town having a generic EZGO key. I know I have seen a few folks on her swapping the ignition, and I could rewire everything and make most work, but what have you found that is an easy swap.

Right now I would like it to be the 3 position for on and the lights turning on, but, not 100% stuck on that.

[JohnnieB]

Google "ezgo unique key switch" and you will find a bunch of them.

Also, you could simply add a uniquely keyed keyswitch in the Reed Switch wire and leave the original keyswitch as is.

[sleepyluke]

I guess my brain is not working Johnnie, I googled several things including individual keyed, but keep coming back to the same part numbers that is the general ingition switch. Gotta work smarter not harder.....

[Sir Nuke]

Originally Posted by sleepyluke

I guess my brain is not working Johnnie, I googled several things including individual keyed, but keep coming back to the same part numbers that is the general ingition switch. Gotta work smarter not harder.....

try these...... googled the exact words johnnie posted.

http://www.powerequipmentsolutions.c...or-e-z-go.html


http://************/pd_unique_key_sw...ith_lights.cfm

http://www.golfcarcatalog.com/produc...ey-Switch.html

http://ezgolfcart.com/i-3598147-igni...nique-key.html

[Knothead]

I put a round, Harley key-switch on mine & love it!

[sportcoupe]

3 position, semi-unique key switch. $13 shipped

http://www.ebay.com/itm/3-POSITION-U...item1e8662be6d

[sleepyluke]

Originally Posted by Knothead

I put a round, Harley key-switch on mine & love it!

You are the one I was thinking about! I am thesarusly challenged but I did remember seeing the Harley switch on here a while back!

Question, do you have lights or not?

[Knothead]

Originally Posted by sleepyluke

You are the one I was thinking about! I am thesarusly challenged but I did remember seeing the Harley switch on here a while back!

Question, do you have lights or not?

I do have lights, but opted to use a simple rocker switch for the lights. The round key Harley switch I used has 3 positions, but one is "on" (with key locked into switch so it doesn't fall out), one is "off" (with key also locked into switch, so you can leave the key in buggy), & the third is "off" where you can remove the key. Hope this isn't confusing! Hahaha

When I was shopping for the switch, I saw models available with "off", "on", & "on w/lights".........

[Swan]

I pi\ut this in my CC DS for $19.00

http://www.ebay.com/itm/ROUND-KEY-IG...c847c0&vxp=mtr

also wired in a kill switch

[Knothead]

Originally Posted by Swan

I pi\ut this in my CC DS for $19.00

http://www.ebay.com/itm/ROUND-KEY-IG...c847c0&vxp=mtr

also wired in a kill switch

Looks just like mine, but mine only has two wires......