|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-15-2014, 06:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2012
Posts: 28
|
OBC Cable stud kit?
Spring is almost here in NE MN..sort of...but I need to get my cart ready..Its a 2003 CC. Over the winter, I bought new batteries. I also bought new cables (4ga), an HD F/R switch and a digital battery guage. All from Scotty B. All the cosmetics are done, now its time to tackle the electronics.
The instructions for the F/R switch and the new cables are pretty self explanatory but the OBC cable stud kit has me confused. Where in the heck does it go? It came free with the cables (Thanks Scotty!) but I have no idea what it is or where it goes. thanks for any help...pics would be flippin awesome! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-15-2014, 06:32 PM
|
#2 |
|
Gone Wild
 Join Date: Aug 2009
Posts: 14,245
|
Re: OBC Cable stud kit?
I don't have any pics, but it goes through the OBC. Follow the main negative cable and you will see it...
 |
|
|
|
|
04-15-2014, 06:42 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: OBC Cable stud kit?
The main negative cable goes from the battery pack to the controller B- terminal.... this cable goes through the OBC as shown.
Cut the old cable end off to remove it. Install the stud through the computer in the hole where the cable was. Now install your 2 new cables that go from the battery main - to the OBC stud and from the other side of the OBC stud to the controller B- |
|
|
|
|
04-15-2014, 06:46 PM
|
#4 |
|
Crazy Buggy Wild !!
Join Date: Mar 2014
Location: Destin, Florida
Posts: 596
|
Re: OBC Cable stud kit?
I just put mine on. It goes thru the OBC as shown. Make sure to reset the OBC and charge the batteries until the charger shuts off.
Thanks, M |
|
|
|
|
04-15-2014, 06:53 PM
|
#5 |
|
Not Yet Wild
Join Date: Jan 2012
Posts: 28
|
Re: OBC Cable stud kit?
Thanks all. Is there an order in which I should be doing this? Cables, F/R, obc, and batts? Does the OBC reset by its lonesome or is there something I have to do? Sorry for all the questions but I have never even looked at the "business end" until lately....
|
|
|
|
|
04-15-2014, 07:08 PM
|
#6 |
|
Crazy Buggy Wild !!
Join Date: Mar 2014
Location: Destin, Florida
Posts: 596
|
Re: OBC Cable stud kit?
The reset procedure is the sticky section of these area.
M |
|
|
|
|
10-14-2014, 02:18 PM
|
#7 |
|
Not Yet Wild
Join Date: Aug 2014
Location: Wisconsin
Posts: 2
|
Re: OBC Cable stud kit?
i had the same question thanks for your post. what did you do with the two resitor jumpers that ame in the ORB package.
thanks for your help |
|
|
|
|
10-14-2014, 02:52 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: OBC Cable stud kit?
I'm gonna guess I already answered this question in email? if not lemme know.
|
|
|
|
|
08-21-2016, 02:01 PM
|
#9 |
|
Gone Wild
Join Date: Aug 2016
Location: Galveston, Texas
Posts: 720
|
Re: OBC Cable stud kit?
Where can you buy the stud kit?
|
|
|
|
|
08-21-2016, 02:34 PM
|
#10 |
|
Not Yet Wild
Join Date: May 2016
Posts: 69
|
Re: OBC Cable stud kit?
you can make your own, that's what I did. got a 3" stud and fender washers from Lowes building materials and the nuts. the bolt is 5/16" by 3" long, also got some 1- 1/2" rubber washers to use against the obc, just don't tighten to tight against the obc.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| OBC stud | Electric Club Car | |||
| 2ga welding cable vs 2ga battery cable vs 2ga speaker cable | Electric Club Car | |||
| Stripped stud | Electric Club Car | |||
| Any one ever use stud spacers | Electric golf carts | |||
| 4 Stud to 5 Stud Adaptors / Hubs | Design Center | |||
Linear Mode
