|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-09-2014, 08:37 AM | #11 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZ-GO Series cart problem
Sounds like one (or more) sluggish microswitches.
The solenoid activation circuit has two microswitches whose NC (Normally Closed) contacts have to close to energize the solenoid. MS-2 and MS-3 on attached schematic with solenoid activation circuit highlighted. MS-2 on the F/R assembly is the most likely suspect. Attached is a cutaway of a microswitch showing the miniscule spring that closes the NC contacts when the level arm is released. It doesn't take much gunk to stop it from doing its job. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2014, 08:55 AM | #12 |
Not Yet Wild
Join Date: Jun 2012
Posts: 18
|
Re: EZ-GO Series cart problem
2002
|
05-09-2014, 08:58 AM | #13 |
Not Yet Wild
Join Date: Jun 2012
Posts: 18
|
Re: EZ-GO Series cart problem
Thx for replies! I'll ck out micro switches. I have a problem now also with my wife's Stealth 64v Commander, and I have no wiring diagram to begin troubleshooting! Anyone know about the Stealths? Only clicks when you accelerate, no movement.
|
05-09-2014, 09:10 AM | #14 |
Gone Wild
Join Date: Jan 2014
Location: South Georgia
Posts: 1,120
|
Re: EZ-GO Series cart problem
I would guess the key switch has some sort of problem too. I would make some measurements at the solenoid coil and contacts. The solenoid has to be making connection somehow to get power to the motor. Anyway this is where I would start troubleshooting if it were my cart.
|
05-09-2014, 09:16 AM | #15 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: EZ-GO Series cart problem
I melted two stock solenoids on a 1998 stock series, and it became intermittent. I guess it's possible the solenoid can be sticking to the plastic contact holders without truly being welded? Doesn't explain all of the problems though.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
94 Club Car DS Series Acceleration / Petal Problem | Electric Club Car | |||
96 EZGO TXT Series - Alltrax 48500EZ problem | Electric EZGO | |||
Txt series problem | Electric EZGO | |||
Series Cart Electrical Problem | Electric EZGO | |||
Series cart wiring problem | Electric EZGO |