|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-29-2018, 07:11 AM | #11 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha G2-G9 not starting after.....
I’m bad at wiring and following a scamatic lol unless there are pics explaining where to wire it up ect...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-29-2018, 07:46 AM | #12 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha G2-G9 not starting after.....
I just ordered the parts but I don’t think I have the skills to do it, I searched the net and here and there is none to very little info on how to do this, soooo I’ll post for some help when I get the parts
|
05-29-2018, 08:06 AM | #13 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: Yamaha G2-G9 not starting after.....
This is really about as simple as it gets. I think trying to to step-by-step pictures would make it more confusing than it really needs to be... If I hadn't already run all of my wires into wire loom and tape I'd go take some more pictures, but at the moment it pretty much looks like it came from the factory with the chrysler kit in it.
And I wouldn't bother ordering the stuff... just run up to Napa or o'reilly or wherever. better that way because most of them come with a lifetime warranty. if you smoke it, just run it 20 minutes up the road and they'll swap it out. much better than having to ship it back and forth online. |
05-29-2018, 10:50 AM | #14 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha G2-G9 not starting after.....
Does (To pickup) white/black,white/red go to the 2 wires from the igniter????
|
05-29-2018, 11:00 AM | #15 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: Yamaha G2-G9 not starting after.....
The white/black and white/red from from the ignitor to the pickup coil (they look like they run inside the motor through a rubber grommet). There is a little white 3pin connector with the white/red, white/black, and i believe another black wire on a pigtail between the motor and the ignitor. You could connect to the wires here, or at the ignitor connector whichever is easier.
|
05-30-2018, 11:13 AM | #16 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha G2-G9 not starting after.....
|
05-30-2018, 11:40 AM | #17 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: Yamaha G2-G9 not starting after.....
That is just a dual version of the one I used. It is nice because it gives you a spare that's already installed for a rainy day in case yours fails... just move the spades down to the other set of terminals.
See diagram below |
05-30-2018, 12:20 PM | #18 | |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Yamaha G2-G9 not starting after.....
Quote:
|
|
05-30-2018, 01:21 PM | #19 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha G2-G9 not starting after.....
I’m at a stand still after installing a speed spring it will not run just spits and sputters and pops here and there, trying to find a pic of a completed install just to see if I have it set up correctly
|
05-30-2018, 01:34 PM | #20 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: Yamaha G2-G9 not starting after.....
Thanks to CP241 I just figured out why it wouldn’t move after the speed spring install
Problem is the throttle cable is not moving to pull the linkage on the rearmed ??do I need to fab up a longer bracket to extend the cable ? |
|
|
Similar Threads | ||||
Thread | Forum | |||
starting issues g1 yamaha | Gas Yamaha | |||
Hard starting Yamaha G1 | Gas Yamaha | |||
Yamaha G1 Starting | Gas Yamaha | |||
Yamaha G19 hesitation when starting | Electric Yamaha | |||
Gas Yamaha has trouble starting | Gas Yamaha |