Is the Key Switch on a Yamaha G29 Just That - A switch?

LSUM1KE · 06-18-2020, 06:23 PM

Hi Guys,
Like many things on my project G29, lots of things have been cut off the wiring harness. The key switch is one. It currently has a key switch (not a OEM G29 switch) with two wires. It seems to work just fine but I was thinking of removing the wire nuts currently on it and put a G22 key switch and clean it up with spade connectors. This way I do not have to source another crazy connector for the G29 key switch assembly. Any issue doing this? Does the G29 assembly send anything else back to the controller or is it just a switch.

cgtech · 06-19-2020, 04:45 AM

If your wire harness has only 2 wires to the key switch, then yes, it's just "on-off". Many yamahas with lights from the factory had 4 wires.

LSUM1KE · 06-19-2020, 02:46 PM

Great. I'll clean it up then with a Yamaha G22 key switch. No lights at the moment and just two wires. Once it get it running then will add accessories. Just ordered a new controller.

06-18-2020, 06:23 PM	#1
LSUM1KE Not Yet Wild Join Date: Mar 2015 Location: Houston Posts: 15	Is the Key Switch on a Yamaha G29 Just That - A switch? Hi Guys, Like many things on my project G29, lots of things have been cut off the wiring harness. The key switch is one. It currently has a key switch (not a OEM G29 switch) with two wires. It seems to work just fine but I was thinking of removing the wire nuts currently on it and put a G22 key switch and clean it up with spade connectors. This way I do not have to source another crazy connector for the G29 key switch assembly. Any issue doing this? Does the G29 assembly send anything else back to the controller or is it just a switch.

06-19-2020, 04:45 AM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Is the Key Switch on a Yamaha G29 Just That - A switch? If your wire harness has only 2 wires to the key switch, then yes, it's just "on-off". Many yamahas with lights from the factory had 4 wires.

06-19-2020, 02:46 PM	#3
LSUM1KE Not Yet Wild Join Date: Mar 2015 Location: Houston Posts: 15	Re: Is the Key Switch on a Yamaha G29 Just That - A switch? Great. I'll clean it up then with a Yamaha G22 key switch. No lights at the moment and just two wires. Once it get it running then will add accessories. Just ordered a new controller.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Wiring Alltrax for reverse with single micro-switch F&R switch...	Electric Club Car
99 club car 48 volt has rocker switch with diag plug hole in bottom of switch	Electric Club Car
2009 Precedent run/tow toggle switch replaced with keyed switch	Electric Club Car
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum