speed spring install, need help

Yamaha4life · 11-10-2007, 10:54 AM

well, i finnally got my speed spring and am trying to install it. i got all the cables and the bushings and pins ect off and have everything off but the arm thats above the spring. i took the 10mm nut off and it wont budge. it seems loose but it wont "slide" off like the instructions say. i need some help

thanks

Yamaha4life · 11-10-2007, 01:36 PM

ok well i shot it with some litium grease and let it sit for a while, a boom, it came right off. i had alot of trouble getting the throttle connections hooked back up.being 6 foot 4 dosent help anything

. i dont know who said this was a 10 minute job but they must have really small hands and be really short to do it in 10 minutes.

all in all its worth it, i noticed way more power when first taking off as well. i know its not just my mind, its way way more powerfull. maybe the first spring was bad or the cable want hooked up right, i dont know but i do it my cart now flies

11-10-2007, 10:54 AM	#1
Yamaha4life The Overposter! Join Date: Nov 2007 Location: Dixie Posts: 1,586	speed spring install, need help well, i finnally got my speed spring and am trying to install it. i got all the cables and the bushings and pins ect off and have everything off but the arm thats above the spring. i took the 10mm nut off and it wont budge. it seems loose but it wont "slide" off like the instructions say. i need some help thanks

11-10-2007, 01:36 PM	#2
Yamaha4life The Overposter! Join Date: Nov 2007 Location: Dixie Posts: 1,586	Re: speed spring install, need help ok well i shot it with some litium grease and let it sit for a while, a boom, it came right off. i had alot of trouble getting the throttle connections hooked back up.being 6 foot 4 dosent help anything . i dont know who said this was a 10 minute job but they must have really small hands and be really short to do it in 10 minutes. all in all its worth it, i noticed way more power when first taking off as well. i know its not just my mind, its way way more powerfull. maybe the first spring was bad or the cable want hooked up right, i dont know but i do it my cart now flies

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Vangaurd Install	Big Block Talk!
Yamaha Golf Cart Speed Spring	Golf Cart Parts
help with tire n wheel install....	Design Center
fuel guage install on G9	Gas Yamaha
Power Kit install	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum