01-12-2008, 09:08 PM | #1 |
Getting Wild
Join Date: Nov 2007
Posts: 103
|
Removing V-Twin Flywheel
I need help on removing the Briggs & Stratton V-Twin 16HP Flywheel, I got the nut off and so its just not comming off. Do I just keep pulling on the flywheel and hit it to get it off. Here is a picture of the flywheel. Oh, the engine is complete, I just took it all apart cause it needs to be rebuilt actually just the engine needs to be Bored with new over sized pistons, so I'm getting it bored asap and get new pistons with rings and such...
Anyways, please help me out on the flywheel... Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2008, 09:51 PM | #2 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Removing V-Twin Flywheel
Quote:
|
|
01-13-2008, 01:25 AM | #3 |
Getting Wild
Join Date: Nov 2007
Posts: 103
|
Re: Removing V-Twin Flywheel
I got it off, and it was all good. I completely cleaned the motor and the wheel
and so I just have to wait a little to get the engine bored and get new pistons and such. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Removing an EZGO clutch | Ezgo Gas Tech | |||
Removing the air filter box | Gas Yamaha | |||
newbie questions 1992 twin cylinder | Gas EZGO | |||
Kohler command v-twin engine parts. | Golf Cart Parts | |||
V-Twin Performance | Golf Cart Parts |