|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-26-2011, 05:08 PM | #21 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 4 stroke HEI Conversion
The diagram looks right to me. Ive done this on several different vehicles from carts to man lifts. The only things I can think to be sure of is:
1. The module is actually good 2. The pulsar is working. (hook a voltmeter to it and spin the motor, if the voltage jumps its probably good. I dont know of any other way to check the pulsar.) 3. Make sure the back of the module is grounded good or it wont run. Bolt through that bolt hole on the right side to ground. 4. Switch the pulsar wires around .....thats about it. Its got to have plenty of power to fire so you might try running a hot wire to batt + to test. W&G to pulsar, C to - on coil and B to batt + is about it. I know when I did this to my 2 stroke it made a noticeable difference on start-up when changing the pulsar wires around. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2011, 12:38 PM | #22 |
Not Yet Wild
Join Date: Mar 2011
Location: Orange County, CA
Posts: 47
|
Re: 4 stroke HEI Conversion
Any update on if he got it working or not?
|
03-27-2011, 12:53 PM | #23 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: 4 stroke HEI Conversion
same here, i am really wanting to upgrade mine also.
|
06-08-2011, 07:15 PM | #24 |
Not Yet Wild
Join Date: Mar 2011
Location: Middle GA
Posts: 6
|
Re: 4 stroke HEI Conversion
I would like to know if MC footer's coil combo worked with the hei upgrade, too. Any updates??
|
06-08-2011, 09:56 PM | #25 | |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
Quote:
The coil works as pictured and I have tried the suggestions above... Except I may need to try a better grounding method I originally tried it by just bolting a ground wire to it. I also need to try running the wires direct and skip the factory harness. Originally I was trying a modified 4 pin plug into the factory harness. I'll try to get back to it before too long..... |
|
06-09-2011, 09:51 AM | #26 |
Not Yet Wild
Join Date: Mar 2011
Location: Middle GA
Posts: 6
|
Re: 4 stroke HEI Conversion
Ok, so it seems to run good with that coil setup?
|
06-09-2011, 09:52 PM | #27 |
Not Yet Wild
Join Date: Jun 2009
Location: TN
Posts: 45
|
Re: 4 stroke HEI Conversion
|
06-19-2011, 10:05 PM | #28 |
Getting Wild
Join Date: May 2011
Posts: 111
|
Re: 4 stroke HEI Conversion
This conversion ROCKS!! Great spark and $40 was all it took!
|
06-20-2011, 10:53 AM | #29 |
Not Yet Wild
Join Date: Mar 2011
Location: Middle GA
Posts: 6
|
Re: 4 stroke HEI Conversion
Yeah, I finished up friday. I used the MSD base like MCfooter (had to put silicone over terminals on bottom side of base because terminals would had shorted to ground) but instead of ACCEL coil went to autozone and bought a coil for a 1990 buick century 4cylinder. Mounted it to existing bracket and worked like a charm. Paid $10.99 for the MSD base from ebay and $25.99 for the coil
Last edited by ssthomaston; 06-20-2011 at 10:55 AM.. Reason: wanted to include cost |
08-12-2011, 09:29 AM | #30 |
Not Yet Wild
Join Date: Apr 2011
Posts: 12
|
Re: 4 stroke HEI Conversion
MC,
Did you ever get your's running right? I too did the conversion on my 295, mine will run in neutral at very low speed but at full throttle it just sputters. Can someone let me know if the pulsar could be causing this? or is one of those all or nothing parts? |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2 Stroke into 4 stroke conversion | Big Block Talk! | |||
help is my cart 2 stroke or 4 stroke? | Gas Club Car | |||
88 ezgo 2 stroke convert to 4 stroke | Gas EZGO | |||
can i use 2 stroke ezgo clutch on 4 stroke | Big Block Talk! | |||
Easy: 4-Stroke vs 2-Stroke | Gas Club Car |