|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-30-2010, 09:53 PM | #1 |
Not Yet Wild
Join Date: Aug 2010
Posts: 2
|
1980 g1/a1
hello all, just purchased a g1/a1 that i plan to restore. have never worked on a golf cart before but i like to tinker around. did a compression test and found none so i have ordered a jug and piston. the guy i bought it from recently had the starter/generator rebuilt, so that's good. my problem is that it won't start in reverse. i can hear the solenoids throwing when i press on the pedal but the generator will not turn. (it works fine in the forward position). if i reverse the a1 and a2 leads at the solenoid then the generator will reverse but that doesn't fix the problem. mine has a blue wire going to what i think is the reverse solenoid and a yellow wire going to the forward solenoid. if i check the plug for these wires with an ohm meter it appears that the forward /reverse switch on the dash is working. not sure what to do from here. any help would be appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-31-2010, 09:06 AM | #2 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: 1980 g1/a1
do you mean your comp. is low? because no comp.= it won't start in forward or rev.
|
08-31-2010, 11:16 AM | #3 |
Not Yet Wild
Join Date: Aug 2010
Posts: 2
|
Re: 1980 g1/a1
it didn't have any compression, thats why i ordered a new cylinder & piston kit. with the generator belt off, it will turn forward but not in reverse. i talked to a frriend that told me it was probably the solenoid. you can still hear the solenoid click when you try it in reverse but he says it may not be making good contact. anyone ever rebuilt one of these solenoids?
|
08-19-2012, 08:27 PM | #4 |
Not Yet Wild
Join Date: Aug 2012
Posts: 3
|
Re: 1980 g1/a1
Hello i am in the same boat you were with a g1/a1 that will not run in one direction even though the solinoid clicks. just wanted to know what your fix was.thanks in advance.
|
08-19-2012, 09:14 PM | #5 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: 1980 g1/a1
Check your grounds first. These carts are known for ground issues. Also check the connections of every wire. A loose connection makes corrosion and that equals problems.
The solenoids aren't difficult to rebuild. I've never done a G1 solenoid but they aren't much different that the old starter solenoids on some vehicles I've done before. I would invest in a repair/service manual for sure. |
08-20-2012, 01:27 AM | #6 | |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
Re: 1980 g1/a1
Quote:
|
|
08-20-2012, 06:15 AM | #7 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: 1980 g1/a1
Yeah I've had several vehicle with starting/charging problems and 90% of the time it's a broken wire, corroded connection, or loose connection. Sometimes the battery can be low enough that it will act funny too. Also check the charge on the battery, give it a good ole trickle charge.
|
08-20-2012, 07:42 PM | #8 |
Not Yet Wild
Join Date: Oct 2011
Posts: 7
|
Re: 1980 g1/a1
The G1 I fixed up last winter had a similar problem - only started in reverse. Took the forward solenoid completely apart, cleaned all contacts, replaced one stud bolt that was almost corroded off, put back together, and it has worked great ever since. Give it a try.
|
08-20-2012, 10:24 PM | #9 |
Not Yet Wild
Join Date: Aug 2012
Posts: 3
|
Re: 1980 g1/a1
Thanks all, will check grounds and loose,corroded connections.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1980 Marathon... | Gas EZGO | |||
1980 G1 vibration | Gas Yamaha | |||
1980 EZ-GO problems need help! | Gas EZGO | |||
1980 EZ Go 4 wheeler | Electric EZGO |