Cracked case

cardiac · 10-10-2011, 09:02 AM

Have a 88 2cycle with a cracked case on the flywheel side. Not broken off yet, was wondering if anyone had any idea's on patching it, or finding just the one side of the engine case as a replacement.
Thanks Joe

madoc1 · 10-10-2011, 10:48 AM

i think you can tig weld the crack. it's worth a try, or put an ad in the for sale forum -- looking for one.

and welcome to BGW.

simple man · 10-10-2011, 11:22 AM

Quote:

Originally Posted by madoc1

i think you can tig weld the crack. it's worth a try, or put an ad in the for sale forum -- looking for one.

and welcome to BGW.

Any decent welding shop can do this for you. If you can trailer your cart, just run it by there and let someone look at it. You may luck out and be able to have it done with the engine in place!

ScooterMcTavish · 10-12-2011, 11:26 PM

Seems that welding works well (read this in another post), but take it to a person who knows how to weld properly. Having a sealed case is integral to fuel feed, so it needs to be an airtight seal once it's done.

rib33024 · 04-06-2012, 04:08 AM

cardiac, how did you fix this

racin161 · 04-06-2012, 07:59 AM

As an owner of a welding shop PLEASE don't try to JB weld it. For an aluminum repair the parts have to be clean and Tig welding is your only permanent option. As stated run it by a welding repair shop and see what they suggest you may have to pull the engine.

10-10-2011, 09:02 AM	#1
cardiac Not Yet Wild Join Date: Oct 2011 Location: JC MO. Posts: 11	Cracked case Have a 88 2cycle with a cracked case on the flywheel side. Not broken off yet, was wondering if anyone had any idea's on patching it, or finding just the one side of the engine case as a replacement. Thanks Joe

10-10-2011, 10:48 AM	#2
madoc1 no clue Join Date: Sep 2009 Location: spicewood, texas Posts: 3,308	Re: Cracked case i think you can tig weld the crack. it's worth a try, or put an ad in the for sale forum -- looking for one. and welcome to BGW.

10-12-2011, 11:26 PM	#4
ScooterMcTavish Gone Wild Join Date: Oct 2009 Location: Manitoba, Canada Posts: 363	Re: Cracked case Seems that welding works well (read this in another post), but take it to a person who knows how to weld properly. Having a sealed case is integral to fuel feed, so it needs to be an airtight seal once it's done.

04-06-2012, 04:08 AM	#5
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: Cracked case cardiac, how did you fix this

04-06-2012, 07:59 AM	#6
racin161 Gone Wild Join Date: Feb 2011 Posts: 1,515	Re: Cracked case As an owner of a welding shop PLEASE don't try to JB weld it. For an aluminum repair the parts have to be clean and Tig welding is your only permanent option. As stated run it by a welding repair shop and see what they suggest you may have to pull the engine.
racin161 Gone Wild Join Date: Feb 2011 Posts: 1,515

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic)	Gas EZGO
Cracked trans case on a g14	Gas Yamaha
84 gas club car ds cracked transaxle	Gas Club Car
G9 clutch cover cracked	Gas Yamaha
Cracked Bumper Repair	Body and Paint