|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-12-2013, 04:25 PM | #1 |
Not Yet Wild
Join Date: Jun 2013
Location: Ohio
Posts: 5
|
G1 torque specs
Does anyone know if the service manual would have torque specs for some of the bolts on the older g1's. or if there is a website with that info
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2013, 08:47 PM | #2 |
Not Yet Wild
Join Date: Apr 2012
Location: Northern Indiana
Posts: 23
|
Re: G1 torque specs
Specs for G1 Gas Engine:
Std. Bore 68.00mm Piston Clearance 0.03 ~ 0.035 mm Ring End Gap 0.2 ~ 0.4 mm Flywheel Nut 52.6 ft. lbs. Clutch Bolt 43 ft. lbs. Crankcase Bolts 4.7 ft. lbs. Head Bolts (Initial) 14.5 ft. lbs. (Final) 18 ft. lbs. Hope this is what your looking for |
06-12-2013, 10:05 PM | #3 |
Not Yet Wild
Join Date: Jun 2013
Location: Ohio
Posts: 5
|
Re: G1 torque specs
Is there anything these guys on this site don't have answers for??
|
06-14-2013, 11:21 AM | #4 |
Gone Wild
Join Date: Aug 2012
Location: NE Ohio
Posts: 197
|
Re: G1 torque specs
Nope...
|
06-14-2013, 01:11 PM | #5 |
Gone Wild
Join Date: Jun 2012
Location: Eagle, WI
Posts: 317
|
Re: G1 torque specs
Can always make something up.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
torque specs | Gas EZGO | |||
E-Z-GO Torque Specs | Electric EZGO | |||
Torque specs for 76 | Gas Harley Davidson | |||
Torque Specs | Gas EZGO | |||
Torque specs | Gas Club Car |