|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-20-2013, 08:11 AM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2013
Posts: 5
|
G1 crank case gasket
I have a g1 I bought it in pieces, does it take a crank case gasket or do I just use yamaha bond? Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-20-2013, 08:44 AM
|
#2 |
|
Getting Wild
Join Date: Mar 2013
Posts: 116
|
Re: G1 crank case gasket
If you have the motor tore down order a top end gasket kit and replace them all. Any of the cart shops should have it, I like Plowmans on the sponsors page
|
|
|
|
|
07-20-2013, 09:34 AM
|
#3 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 crank case gasket
No gasket, just use Yamabond
 |
|
|
|
|
07-20-2013, 10:35 AM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2013
Posts: 5
|
Re: G1 crank case gasket
Thanks I'm new to all of this, how about the ring gap? I ordered the top end kit and I'm getting .042 on the ring gap. I don't have the old rings but I have the old piston and its the same size
|
|
|
|
|
07-21-2013, 10:46 AM
|
#5 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 crank case gasket
Ring end gap should be Minimum...0.20mm (0.0079in), Max....0.40mm (0.0167 in).
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| POP goes the crank case | Gas EZGO | |||
| 87 2pg crank case? | Gas EZGO | |||
| Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic) | Gas EZGO | |||
| Yamaha G1 Crank Case oil? | Gas Yamaha | |||
| 1983 crank case oil | Gas EZGO | |||
Linear Mode
