07-24-2014, 09:54 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Posts: 4
|
FE350D Valves not moving
2001 CC Carryall 2 with FE350D-AS11 engine.
Had been using cart with no problems (and no odd noises). When it was time to move again, engine would not hit but turned freely. Eventually took valve cover off and turned crank via starter. Neither valve moved. Could not feel anything tapping on the push-rods either. What could have happened? Does cam have a plastic gear that may be broken? Thanks for any help or suggestions. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2014, 08:27 PM | #2 |
Not Yet Wild
Join Date: Aug 2012
Posts: 38
|
The cam gear is riveted to the camshaft. The rivets seem to pop on the punched side. I pull the engine, fish all the rivet bits out of the base ( the rivets never all sheer at the same time that I've seen, so check in the oil strainer and the drain plug holes), get some machine screws and finish nuts the same size and tighten the gear back on. Center punch the screw end so it locks the nuts on.
A load of work for something silly, but there ya go. Rom |
07-28-2014, 03:30 PM | #3 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: FE350D Valves not moving
|
08-01-2014, 09:41 AM | #4 |
Not Yet Wild
Join Date: Jul 2014
Posts: 4
|
Re: FE350D Valves not moving
That is what I was thinking I would find also.
Your replies have made me more confident that is what is wrong. I have pulled the engine and hope to take it appart this weekend. |
|
|
Similar Threads | ||||
Thread | Forum | |||
fe350d kawasaki | Gas Club Car | |||
Need A FE350D-AS10 motor | Golf Carts and Parts | |||
FE350d-AS10 motor | Gas Club Car | |||
Regular Valves Vs. MCI valves | Gas EZGO | |||
FE350D Help | Gas Club Car |