lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!
Big Block Talk! Everything about swapping a big block engine into your cart!



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-31-2021, 11:13 AM   #11
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
Default Re: Rev kit installation

I usually use an off the shelf key switch from local parts store, just make sure it's the Briggs and Stratton type.

There's not much to the wiring. Let me see if I have a diagram of some sort.
slonomo is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-31-2021, 11:51 AM   #12
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
Default Re: Rev kit installation

I used to have some photos but can't locate them. Here are the factory wiring diagrams for 5 pole and 6 pole type switches.
Attached Images
File Type: jpg Vanguard wiring 1.jpg (92.2 KB, 0 views)
File Type: jpg briggs-wiring-6-pole-switch.jpg (65.4 KB, 0 views)
File Type: jpg briggs-wiring-5-pole-switch.jpg (56.9 KB, 0 views)
slonomo is offline   Reply With Quote
Old 05-31-2021, 02:20 PM   #13
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Rev kit installation

Thanks, I have on hand know is a 6 pole switch and wires, red,black,yellow,white,brown,orange
nitro1 is offline   Reply With Quote
Old 05-31-2021, 02:23 PM   #14
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Rev kit installation

Pic of harness
Attached Images
File Type: jpg image.jpg (170.8 KB, 0 views)
File Type: jpeg C1908428-7075-4A40-9164-BB347D96710C.jpeg (84.8 KB, 0 views)
nitro1 is offline   Reply With Quote
Old 05-31-2021, 02:31 PM   #15
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Rev kit installation

Idk why the images are coming out sideways?

But I have the black wire (ground) to the side terminal, orange to one side of the solenoid post, yellow to the solenoid connector on the side of solenoid, red exposed to be going to the regulator but the terminals are different so I’ll have to solder them together, white wire is for fuel solenoid (not using) and brown ????? Unknown what that’s for
nitro1 is offline   Reply With Quote
Old 05-31-2021, 04:26 PM   #16
BIKERMIKEYBLACK
Gone Wild
 
BIKERMIKEYBLACK's Avatar
Yamaha
 
Join Date: Jun 2011
Location: Kingston Springs Tn.
Posts: 874
Default Re: Rev kit installation

Go to CPP and get isky springs reasonable and proven shims are not that great
BIKERMIKEYBLACK is offline   Reply With Quote
Old 05-31-2021, 06:58 PM   #17
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Rev kit installation

Those are installed, working on the key switch harness I believe I got every wire correct but I have a brown wire not sure if that is used or not
nitro1 is offline   Reply With Quote
Old 06-02-2021, 05:58 AM   #18
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
Default Re: Rev kit installation

If you are using the Predator harness I can't be of any help. Never used that. I always run my own new wiring. You'll have to get your multimeter out and do some poking to see what's what. However, the switch tells the story of what each wire will do.
slonomo is offline   Reply With Quote
Old 06-02-2021, 08:27 PM   #19
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Rev kit installation

Thanks, I got the harness built looks great. My next question is the stock motor plate on my club car is that good to use ? And do u guys use some kind of shock absorber between the plate and motor ?
nitro1 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!


Thread Tools
Display Modes


Similar Threads
Thread Forum
Installation help Lithium Club Car
G14 Gas Governor Installation Gas Yamaha
Canvas Top Installation Gas Club Car
MP3 amp installation Electric EZGO
pot box installation Electric Club Car


All times are GMT -5. The time now is 07:43 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.