|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-29-2008, 06:02 AM | #1 |
Not Yet Wild
Join Date: Apr 2008
Posts: 4
|
Threads per inch ? on stock rear shock....
Many thanks for your expert advice concerning my original ? below. If I
purchase some all-thread and coupling nuts, do I need 3/8-16 or 3/8-24 TPI? I would crawl under the cart myself and check, but the CC is stored some 50 miles away in a rural location. Thanks, again for making me feel welcome as a new member, and relative novice to carting. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-01-2008, 04:32 PM | #2 |
Not Yet Wild
Join Date: Apr 2008
Posts: 4
|
And the answer is...... 3/8 - 24 TPI
Finally found time to crawl under the cart for a thread count.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
rear shock problem ? | Electric Club Car | |||
Most threads are marked as new posts(fixed!) | Announcements | |||
1 inch to 1.5 inch pipe expander | Design Center |