|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-12-2019, 09:32 AM | #1 |
Not Yet Wild
Join Date: May 2016
Posts: 17
|
How screwed am I?
Yesterday I was replacing the stock rear shocks with heavy duty ones. When I got the shock off it dropped and somehow sheered a cable running to the motor off and left it with a small portion of the screw sticking out. Please take a look at the picture. I have no idea how to repair this.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2019, 09:46 AM | #2 |
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: How screwed am I?
Think i still have my burnt up motor that has good posts on it .. ill check when i get home on lunch
|
06-12-2019, 11:20 AM | #3 |
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: How screwed am I?
not sure how you can make it work but i got it lol
|
06-12-2019, 12:05 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: How screwed am I?
How does crap like that even happen !?
Any local motor or alternator & starter shop should be able to repair this one for you. |
06-12-2019, 01:21 PM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: How screwed am I?
Or look at it this way, now's your chance to get a better motor. FSIPs motor 48-speedey is a good one. And can allegedly be run on the stock controller.
I don't see how that used shell above would help you at all, it's too far shredded. |
06-12-2019, 02:05 PM | #6 |
Gone Wild
Join Date: May 2016
Posts: 1,115
|
Re: How screwed am I?
If the motor ran good. Get one of these nuts and clean up the threads on the bolt coming out of the motor. Carefully screw the new nut on the motor DO NOT let the stud in the motor turn. Tighten up the nut. And bolt your cable back to the new nut on the motor. You have nothing to lose. You might be able to save your motor
https://www.homedepot.com/p/Hillman-...B&gclsrc=aw.ds |
06-12-2019, 02:19 PM | #7 |
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: How screwed am I?
|
06-12-2019, 07:23 PM | #8 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: How screwed am I?
|
06-13-2019, 09:57 AM | #9 |
Not Yet Wild
Join Date: May 2016
Posts: 17
|
Re: How screwed am I?
Thank you for all the replies. I think I am going to take scottyb's advice and find a place to take it to. Hopefully they can fix it. Just my luck when I try to work on something myself
At least I was able to get the new shocks installed and tires on. |
06-13-2019, 11:23 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: How screwed am I?
Keep us posted on the repair.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
maybe screwed up . | Gas EZGO | |||
I screwed something up | Electric EZGO | |||
Am I screwed? | Body and Paint | |||
Just might have screwed up... | Electric golf carts |