|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-27-2013, 07:28 PM | #21 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Drilling holes in acrylic windshield?
I've heard of Glass-Places using a BB-Gun before.I guess they hold it tight to the glass when they fire it.Never tried it though.The Uni-Bit or Step-Drill as they are called(Uni-Bit is a name-brand),Are availiable anywhere.HarborFreight sells a 3pc. set for under $15 and they work great.I've had my set almost 10yrs,and use 2 of them daily on pick-up trucks when I do Plow installs and Roof-Top Lites(doing 1 tomorrow morning).The wood-block isn't a bad idea either.I do that when I can,it definitely helps.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-28-2013, 06:28 PM | #22 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Drilling holes in acrylic windshield?
i was joking about shooting it, lots of ideas on this thread, some overcomplicated. i drill these windows every day, just get the 3 piece step drill from harbor freight. you would have to be drilling pretty carelessly, or pressing way too hard for the window to break. use the bit with the smallest steps.
|
03-28-2013, 06:42 PM | #23 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: Drilling holes in acrylic windshield?
Just picked up the step bit today.
Bob T |
03-28-2013, 07:10 PM | #24 |
Gone Wild
Join Date: Jun 2012
Location: Christiansburg, VA
Posts: 159
|
Re: Drilling holes in acrylic windshield?
Take a look at this, half way down it tells how to drill acrylic, and how to cut it and to clear the edges. Hope this helps.
http://www.bcae1.com/plexi.htm |
03-28-2013, 07:59 PM | #25 |
Gone Wild
Join Date: Jul 2012
Location: Pigeon Forge TN
Posts: 209
|
Re: Drilling holes in acrylic windshield?
That is very informative. It explains a lot. Thanks for the post.
Bob T |
|
|
Similar Threads | ||||
Thread | Forum | |||
Duplicolor Acrylic Lacquer Metallic | Body and Paint | |||
drilling holes in body | Electric Club Car | |||
Drilling jet out | Gas Yamaha | |||
Drilling out the carb Jet | Gas EZGO | |||
Fold Down Acrylic Windshield | Gas Club Car |