|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-23-2023, 09:25 PM | #1 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
G29 axle rebuild
have a 2010 and im thinking the axle needs freshened up if they can be or even worth it. seem i have to much play on the secondary shaft in/out and up an down
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-24-2023, 01:22 PM | #2 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G29 axle rebuild
ok i have looked into a bit more and my input shaft moves forward a little when give gas and has torque, is the bearing and or complete shaft replaceable
|
07-26-2023, 10:38 AM | #3 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G29 axle rebuild
does anyone know about these axles im not having much luck
|
07-27-2023, 07:55 PM | #4 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: G29 axle rebuild
Change the fluid, keep the rear hubs tight and call it a day.. they are good differentials
|
07-28-2023, 05:33 AM | #5 |
Gone Wild
Join Date: Jul 2015
Location: Tucson, AZ
Posts: 160
|
Re: G29 axle rebuild
When you change the fluid, make sure it's either the proper Yamaha fluid or if not, add friction modifier as the internal braking system requires it. I know those axles are expensive as hell but have bearings just like any other axle which would be replaceable if it really needed it.
|
07-28-2023, 08:40 AM | #6 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G29 axle rebuild
thank you yes i am seeing they are expensive dang found new input shaft $400 wow
|
07-31-2023, 02:54 PM | #7 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G29 axle rebuild
got my axle apart and is i thought bearing is toast, quetion i have is on the brake should i replace since apart, i did have good brakes but with all the metal from the toasted bearing wonder if they picked up metal
|
07-31-2023, 05:17 PM | #8 |
Gone Wild
Join Date: Jul 2015
Location: Tucson, AZ
Posts: 160
|
Re: G29 axle rebuild
You've done all the labor for the brakes, now it's just the cost of the parts which IIRC, weren't outrageous (at least the friction material wasn't expensive). I'd do them and hope to never venture in there again.
|
07-31-2023, 07:51 PM | #9 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G29 axle rebuild
yeah i ordered brake not to bad considering the input shaft was $390 ouch
|
08-08-2023, 06:12 AM | #10 |
Getting Wild
Join Date: Aug 2020
Posts: 109
|
Re: G29 axle rebuild
so i replaced the input shaft all is good works great but i lost my speed went from 28 down to 19 this is why what are these L shaped weights and how do they work to limit speedhttps://www.buggiesgonewild.com/attachment.php?attachmentid=238709&stc=1&d=1691493 108
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1994 marathon axle rebuild | Electric EZGO | |||
Axle Rebuild 36 Volt TXT PDS CART | Electric EZGO | |||
EZ-GO ST4x4 Front CV Axle Shaft Availability (broken beyond a rebuild) | Gas EZGO | |||
2012 precedent- how to remove rear axle shaft/replace axle seal? | Electric Club Car | |||
1995 EZGO Dana Axle rebuild | Electric EZGO |