Modifying Governor on G16 & G22

[tutiii]

Thanks Gutterboy,
where do you put the spring exactly?

[gutterboy2ca]

should be a hole in the throttle Cam i think, and hook the other end in the Throttle cable Bracket kinda like so.

[tutiii]

Thanks again gutterboy,
cart seems to be running good now.

[mowser]

thank you for your posts they helped me out.

[spriddle]

99 G19 Carb.



99g16carb.JPG

[golfcarthelp]

I have a G16 model and the governor has broken off in the trainy and become jammed inside the trainy. Anyone have any ideas?

If I do get it out, is there a replacement or is the trainy shot? Should I pull off the side trainy cover? Any ideas?

Thanks,

[sho305]

Originally Posted by golfcarthelp

I have a G16 model and the governor has broken off in the trainy and become jammed inside the trainy. Anyone have any ideas?

If I do get it out, is there a replacement or is the trainy shot? Should I pull off the side trainy cover? Any ideas?

Thanks,

I would pull the whole trans and split the case, check everything out. Parts loose in a gearbox are very bad things, everything must be perfect in there. Its a pain but not that hard to take them out. Otherwise have it done it will trash it more if you use it. Unless you are saying it is not affecting anything and in that trans it will not, I had a G1 it broke but it stayed in the shaft hole and never bothered anything.

[golfcarthelp]

Thanks... Got the trainy out and found the problem.... Bent governor

[Iwanna]

Wow..First of all I jest purchased my first cart yesterday.(Total stock '04 G22) and of course the first thing I wanted to do was make it faster. Found this forum and today did the modification....What a difference and very simple Thanks for the great info!!!!


Now on to more mods, as the piggy bank will allow....

[Iwanna]

Ok so after riding the cart some I have noticed your ether wide open or no throttle at all.. No just cursing around mid throttle. If I try mid throttle it gets real jerky. Any ideas??