lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-20-2008, 09:30 AM   #11
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
Default Re: will a 1997 g11 rear end fit in a 1991 g9

Tom is the man!!

TheNewGuy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-20-2008, 09:27 PM   #12
monstertruckr91
Getting Wild
 
Join Date: Sep 2008
Posts: 94
Default Re: will a 1997 g11 rear end fit in a 1991 g9

ok so i ran into a problem im working on this thing out side and its 28 deg. out there whoo cold....i measured the g9 and the bolt pattern is 2.5 in between the bolts and the g-16 is only 2 in any info or ideas on the swap ??????
monstertruckr91 is offline   Reply With Quote
Old 11-21-2008, 11:18 AM   #13
shawn.m
Gone Wild
 
shawn.m's Avatar
 
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,895
Default Re: will a 1997 g11 rear end fit in a 1991 g9

ship me your g16 rearend

Other wise you can slot the holes in the mounting plates
shawn.m is offline   Reply With Quote
Old 11-23-2008, 08:12 PM   #14
monstertruckr91
Getting Wild
 
Join Date: Sep 2008
Posts: 94
Default Re: will a 1997 g11 rear end fit in a 1991 g9

ok so i got the g-16 rear end in the g-9 and ran into a few problems like first i unbolted the g-16 rear end from its mounting plate and fliped it over and theres a half dollar size hole in the housing so i took it up to a shop and had them weld it up so now were good on that
then i put the rear end in the g-9 and only one mounting hole lines up and the bolt under thecarrier lines up too
none of the other ones do so im gonna drill out the mounting plate and make it work and my buddy is going to come over and tack weld it into place for extra strength and weld up the spiders so i have posi
i think i can make the shocks work with the g-16 on the outside of where they are sposed to mount

over all the g-16 is 2 in wider so the rear tires stick out a bit but i dont care
just thought i would share some insight if any one decides to do this

and going to buy some 22x11x10 tires (4) for 25 bucks wow.........
monstertruckr91 is offline   Reply With Quote
Old 11-23-2008, 08:28 PM   #15
groundpounder
Gone Wild
 
groundpounder's Avatar
Yamaha
 
Join Date: Sep 2007
Location: maine
Posts: 3,352
Default Re: will a 1997 g11 rear end fit in a 1991 g9

if you are trying to bolt a g16 rear end in a g9 you will have to do some mods the bolt pattern is different on the swing arm it is a little different.
groundpounder is offline   Reply With Quote
Old 11-23-2008, 08:32 PM   #16
groundpounder
Gone Wild
 
groundpounder's Avatar
Yamaha
 
Join Date: Sep 2007
Location: maine
Posts: 3,352
Default Re: will a 1997 g11 rear end fit in a 1991 g9

oh sorry i didn't read the whole thread . i guess you found out lol
groundpounder is offline   Reply With Quote
Old 11-23-2008, 10:52 PM   #17
monstertruckr91
Getting Wild
 
Join Date: Sep 2008
Posts: 94
Default Re: will a 1997 g11 rear end fit in a 1991 g9

has this been done before??
any one have any pics of a swap
monstertruckr91 is offline   Reply With Quote
Old 11-23-2008, 11:02 PM   #18
yamahauler98
Getting Wild
Yamaha
 
Join Date: Sep 2008
Location: long island
Posts: 83
Default Re: will a 1997 g11 rear end fit in a 1991 g9

monstertruckr91 are there other parts from the g11 that you have access to i am looking for body parts
yamahauler98 is offline   Reply With Quote
Old 11-23-2008, 11:21 PM   #19
monstertruckr91
Getting Wild
 
Join Date: Sep 2008
Posts: 94
Default Re: will a 1997 g11 rear end fit in a 1991 g9

no all i have is a rear swing arm and motor with starter and belts

if any one needs a swing arm let me know cause i dont need it
monstertruckr91 is offline   Reply With Quote
Old 11-27-2008, 09:24 PM   #20
monstertruckr91
Getting Wild
 
Join Date: Sep 2008
Posts: 94
Default Re: will a 1997 g11 rear end fit in a 1991 g9

just thought i would let everyone know i "got er done" no perfect but works well ended up welding into place and welding up spiders and welded a new muffler on it it sounds great not to loud but not to quiet
now all i have to do is lift it and get some wheels for the tires i got and ill be set for now
monstertruckr91 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha




Similar Threads
Thread Forum
greetings folks ez-go txt 1997 Gas EZGO
fe 290 1997 what is it worth Gas Club Car
1997 club car Electric Club Car
1997 TXT Restoration Gas EZGO
1997 E-Z-NOT SO SLOW TXT Videos


All times are GMT -5. The time now is 06:05 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.