|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-02-2020, 11:01 AM | #1 |
Not Yet Wild
Join Date: Jul 2018
Posts: 1
|
221-SSCable an FSIP Speed Motor
Installed FSIP Speed Motor into my Yamaha Drive 2011 and went to install the 221-SSCable. The Yamaha side connects fine but the motor side will not click in. The pins on the Motor cable are round and the adapter has small squares to accept the pins. Needless to say the pins won’t go in. Has anyone had this issue? I have attached photos.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-02-2020, 12:30 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 221-SSCable an FSIP Speed Motor
The 3 rectangle holes are just locking tabs to secure the sockets, they arent conductors.
|
Tags |
221-scable, fsip, speed sensor |
|
|
Similar Threads | ||||
Thread | Forum | |||
FSIP Speed Motor - Max RPM | Extreme DC! | |||
FSIP Speed Motor Install | Electric Club Car | |||
Low top speed? CC Alltrax XCT500 FSIP speed motor | Extreme DC! | |||
Has anyone installed the new FSIP speed motor? | Electric Club Car | |||
FSIP speed motor install TXT48 | Electric EZGO |