need someone who has disassembled a PG2 (1988)

BRICKY · 08-29-2010, 08:35 PM

Thanks for the info. I'll check it out Monday after work and let you know.

Thanks Cliff

BrewCityMusic · 08-30-2010, 03:25 PM

@Dave: Not metric, standard 5/8" fine thread, go figure! So the flywheel DID "suck in" just a bit (looks like 1/32" or maybe a hair more) so hopefully that realigned the rotor and pulsar ... Just redid the rest of the wiring up front and the new reg/solenoid/switches/coil/plug and wire are all in place, just gettin ready to check the mail and see if the HEI arrived, yeah, I'm about ready for THIS project to end !!!

BrewCityMusic · 08-30-2010, 09:06 PM

Well, I give up (almost) - still no spark or current to the coil EXCEPT I noticed that if I'm holding the coil leads and lean on the cart while turning it over, I complete some sort of circuit and test out at between 6-8v (and of course, get a little shock for my troubles) ...

Gonna try and pull the flywheel and check the pulsar leads, magnets on the rotor, etc (maybe the leads are pinched and shorting, I don't know WHAT to expect anymore)

Does ANYONE know of another trouble spot I could peek at (forward and reverse switches or something?)

08-29-2010, 08:35 PM	#11
BRICKY Not Yet Wild Join Date: Aug 2010 Location: Port Orchard, Wa. 98367 Posts: 3	Re: need someone who has disassembled a PG2 (1988) Thanks for the info. I'll check it out Monday after work and let you know. Thanks Cliff

08-30-2010, 03:25 PM	#12
BrewCityMusic Hammer Down !!!! Join Date: Jun 2010 Location: Lake Geneva, WI Posts: 2,681	Re: need someone who has disassembled a PG2 (1988) @Dave: Not metric, standard 5/8" fine thread, go figure! So the flywheel DID "suck in" just a bit (looks like 1/32" or maybe a hair more) so hopefully that realigned the rotor and pulsar ... Just redid the rest of the wiring up front and the new reg/solenoid/switches/coil/plug and wire are all in place, just gettin ready to check the mail and see if the HEI arrived, yeah, I'm about ready for THIS project to end !!!

08-30-2010, 09:06 PM	#13
BrewCityMusic Hammer Down !!!! Join Date: Jun 2010 Location: Lake Geneva, WI Posts: 2,681	Re: need someone who has disassembled a PG2 (1988) Well, I give up (almost) - still no spark or current to the coil EXCEPT I noticed that if I'm holding the coil leads and lean on the cart while turning it over, I complete some sort of circuit and test out at between 6-8v (and of course, get a little shock for my troubles) ... Gonna try and pull the flywheel and check the pulsar leads, magnets on the rotor, etc (maybe the leads are pinched and shorting, I don't know WHAT to expect anymore) Does ANYONE know of another trouble spot I could peek at (forward and reverse switches or something?)

Similar Threads
Thread	Forum
How can I find A1, A2, S1 ans S2 on a disassembled motor?	Electric Club Car
Yamaha G8 Electrical issue solved (speed controller disassembled)	Electric Yamaha
anyone have disassembled marathon rear pic?	Gas EZGO
1988 EZ Go speed ???	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum