|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-11-2012, 05:37 PM | #1 |
Gone Wild
Join Date: Dec 2010
Posts: 635
|
G5 Yam Gas
Looking for parts for a yam G5 classic specific a 12 volt solenoid nivel or buggys carry one or any other g5 parts is there a sub or other yam series thet will work
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-11-2012, 06:09 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: G5 Yam Gas
You don't need use the original style Yamaha solenoid (just to expensive), any good quaility continuos duty solenoid (like White Rodgers) will work, you'll just need to change the small wire ends from spade to eye ends. Try the site sponsors on BGW, I'm shure anyone of them can help you.
|
10-11-2012, 06:22 PM | #3 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G5 Yam Gas
Go to a Heavy-Truck Supplier,or a place that sells truck-equipment,and ask them for a 12v.Continuous-Duty Solenoid.They work great,last nearly forever,and run about $15-$25.The Trombetta-brand are very common and are used now by Yamaha.Hope this helps.
|
10-11-2012, 09:53 PM | #4 |
Gone Wild
Join Date: Jun 2009
Location: ozarks
Posts: 237
|
Re: G5 Yam Gas
if you do they probably will ask if it is insulated or grounded base, 3 wires=grounded base, 4wires= insulated base
|