|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-25-2009, 05:01 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2009
Location: Georgia
Posts: 3
|
speed control conversion
I am restoring a 1984 ez go and would like to know the best way to convert the old resistor speed control to a better system. I will also be lifting it a little and changing to larger tires and wheels. Any good ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-25-2009, 06:42 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: speed control conversion
The conversion is simple enough. You probably have an old speed wiper that will be replaced by a stock Ezgo PB-6 Potentiometer(the Pot) . And the resistor coils will be replaced with a (400 amp. min) solid state speed controller ( just called the controller). The wiring is simple. You will want to use 4 ga. cables and should seriously consider up grading to 48v before you purchase anything. The old motor will run about 25% stronger/faster on the increased voltage....Good Luck.
|
|
|
|
|
03-25-2009, 09:56 PM
|
#3 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: speed control conversion
Hello iammike and Welcome to the forum.
|
|
|
|
|
03-27-2009, 03:10 PM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2009
Location: Georgia
Posts: 3
|
Re: speed control conversion
Thanks. I appreciate the information.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Speed Control Problem on 90 EZ GO | Electric EZGO | |||
| speed control | Electric EZGO | |||
| Electronic speed control | Electric golf carts | |||
| g1 speed control | Electric Yamaha | |||
| speed control issue 92 e z go electric | Electric EZGO | |||
Linear Mode
