|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-25-2020, 02:23 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Posts: 14
|
Crank seals
On the Oilers side to replace oil seal I am stuck at that points please help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-25-2020, 03:39 PM | #2 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Crank seals
Oilers side? Points?
If this is actually a G1 it’s a stator. What help do you need |
07-25-2020, 03:59 PM | #3 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Crank seals
|
07-29-2020, 02:45 PM | #4 |
Not Yet Wild
Join Date: Jun 2020
Posts: 14
|
Re: Crank seals
I've tried the polar done just about everything I can I can't get the flywheel off on the front side of the motor it has stripped out to of the holes I'm at a loss now don't want to pull out the others
|
07-29-2020, 03:23 PM | #5 |
Not Yet Wild
Join Date: Jun 2020
Posts: 14
|
Re: Crank seals
I meant like the injection side I can't get the flywheel off tried everything can I heat these things up with a torch a bit I've been soaking it in pb blaster and not a move had 3 jaw puller on it tried 2 jaw and the normal bolt on puller I pipes out two the screw holes out on to my last two holes before I have to tap and go bigger
|
|
|
Similar Threads | ||||
Thread | Forum | |||
79 Crank seals or not? | Gas Yamaha | |||
Need help with crank seals g1 | Gas Yamaha | |||
G1 crank seals | Gas Yamaha | |||
Help with G1 Crank Seals | Gas Yamaha | |||
g1 crank seals | Gas Yamaha |