When doing 4ga upgrade on a v-glide

OLD MEC · 04-13-2009, 11:37 AM

To get maximum out of your 4 gauge cable change I would replace the "V" glide wiper brush at the same time and clean all contacts inside as well. you may have to remove v drive from frame to make it easier anyway.

rhinoman · 04-14-2009, 08:50 AM

Is there a 4ga equivalent to the wiper brush assemlby ? Contacts are clean, and there doesn't appear to be any pitting.

scottyb · 04-14-2009, 09:08 AM

no. Sounds like you are good to go......

rhinoman · 04-14-2009, 09:20 AM

Thanks. I'll ride 'as is' for now.

OLD MEC · 04-14-2009, 10:01 AM

I didnt know there was a 4 guage wiper brush unit available for V glide do you happen to know what the part number is for it or where is it available from?

rhinoman · 04-14-2009, 10:03 AM

I was under the (perhaps false) impression that there wasn't.

oxfordlawn · 04-14-2009, 10:40 AM

I ordered all my cable and copper lugs from acehardwareoutlet.com
They have a 50' pack of 4 ga. weld cable by US Forge for @ $70
Bulk packs of copper lugs are ridiculously cheap so get some extras. You will want to get 1/4 and 5/16 hole sized lugs. approx. 25 of each at least---you WILL mess some up.

here's what you were looking for I believe. I hope its not a huge picture. sorry if it is.

[IMG]

[/IMG]

oxfordlawn · 04-14-2009, 04:27 PM

HOLY CRAP!!!

I din't realize that the last part of this thread was a piggyback off of a thread that was started June of last year..
What a friggin waste of time that was

VanGogo · 04-27-2009, 12:19 PM

Not a waste, helped me out. lol

04-13-2009, 11:37 AM	#11
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: When doing 4ga upgrade on a v-glide To get maximum out of your 4 gauge cable change I would replace the "V" glide wiper brush at the same time and clean all contacts inside as well. you may have to remove v drive from frame to make it easier anyway.

04-14-2009, 08:50 AM	#12
rhinoman Not Yet Wild Join Date: Jul 2008 Posts: 59	Re: When doing 4ga upgrade on a v-glide Is there a 4ga equivalent to the wiper brush assemlby ? Contacts are clean, and there doesn't appear to be any pitting.
rhinoman Not Yet Wild Join Date: Jul 2008 Posts: 59

04-14-2009, 09:08 AM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: When doing 4ga upgrade on a v-glide no. Sounds like you are good to go......

04-14-2009, 09:20 AM	#14
rhinoman Not Yet Wild Join Date: Jul 2008 Posts: 59	Re: When doing 4ga upgrade on a v-glide Thanks. I'll ride 'as is' for now.
rhinoman Not Yet Wild Join Date: Jul 2008 Posts: 59

04-14-2009, 10:01 AM	#15
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: When doing 4ga upgrade on a v-glide I didnt know there was a 4 guage wiper brush unit available for V glide do you happen to know what the part number is for it or where is it available from?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-14-2009, 10:03 AM	#16
rhinoman Not Yet Wild Join Date: Jul 2008 Posts: 59	Re: When doing 4ga upgrade on a v-glide I was under the (perhaps false) impression that there wasn't.
rhinoman Not Yet Wild Join Date: Jul 2008 Posts: 59

04-14-2009, 10:40 AM	#17
oxfordlawn just hangin' around Join Date: Jan 2009 Location: Oxford Flo-Rida Posts: 1,102	Re: When doing 4ga upgrade on a v-glide I ordered all my cable and copper lugs from acehardwareoutlet.com They have a 50' pack of 4 ga. weld cable by US Forge for @ $70 Bulk packs of copper lugs are ridiculously cheap so get some extras. You will want to get 1/4 and 5/16 hole sized lugs. approx. 25 of each at least---you WILL mess some up. here's what you were looking for I believe. I hope its not a huge picture. sorry if it is.[IMG][/IMG]

04-14-2009, 04:27 PM	#18
oxfordlawn just hangin' around Join Date: Jan 2009 Location: Oxford Flo-Rida Posts: 1,102	Re: When doing 4ga upgrade on a v-glide HOLY CRAP!!! I din't realize that the last part of this thread was a piggyback off of a thread that was started June of last year.. What a friggin waste of time that was

04-27-2009, 12:19 PM	#19
VanGogo Not Yet Wild Join Date: Feb 2009 Posts: 1	Re: When doing 4ga upgrade on a v-glide Not a waste, helped me out. lol
VanGogo Not Yet Wild Join Date: Feb 2009 Posts: 1

Similar Threads
Thread	Forum
upgrade	Electric EZGO
90 36V CC.....Upgrade?	Electric Club Car
G16 upgrade	Electric Yamaha
G19 upgrade	Electric Yamaha
V-glide question	Electric Club Car