|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2020, 03:58 AM | #271 |
Not Yet Wild
Join Date: Jul 2020
Location: Oklahoma
Posts: 23
|
Re: Installing HEI Ignition on 3PG Carts
Could anyone tell me if this will work on a J38 G2(?) Yamaha motor
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2020, 08:06 AM | #272 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: Installing HEI Ignition on 3PG Carts
This should get you started. https://www.buggiesgonewild.com/showthread.php?t=75439
And then maybe this. https://www.buggiesgonewild.com/showthread.php?t=37607 |
09-28-2020, 08:28 PM | #273 |
Not Yet Wild
Join Date: Aug 2020
Posts: 17
|
Re: Installing HEI Ignition on 3PG Carts
When I did the conversion on my cart the 4 pin module I bought wouldn't work. It wasn't that the module was defective, it just wouldn't work for the HEI conversion. It was a BWD CBE4 (new version).
This attached pdf file by L. Dudzik gives information on how to test a 4 pin module to determine which "family" it falls within. The module that worked for me was in the 1.25 volt family. I ended up using an Autozone DR100. The CBE4 that I tried that didn't work was in the 0.0 Volt family. Hope this information helps. |
12-04-2020, 11:26 AM | #274 |
Not Yet Wild
Join Date: Nov 2020
Posts: 2
|
Re: Installing HEI Ignition on 3PG Carts
I put the GM hei ing on a kart an it ran great . JUst done another an having trouble it looses spark after just a short time but the 2 small wires going to the coil never lose power can you help ?
|
12-04-2020, 03:38 PM | #275 |
Not Yet Wild
Join Date: Aug 2020
Posts: 17
|
Re: Installing HEI Ignition on 3PG Carts
What HEI module are you using?
|
12-29-2020, 03:11 PM | #276 |
Not Yet Wild
Join Date: Nov 2020
Posts: 2
|
Re: Installing HEI Ignition on 3PG Carts
I done the HEI switch on one cart and it worked great. Done a second one and has great spark then drops spark till you let up on pedal and hit it again
|
12-29-2020, 04:42 PM | #277 |
Not Yet Wild
Join Date: Aug 2020
Posts: 17
|
Re: Installing HEI Ignition on 3PG Carts
Same HEI module on both carts?
Can you try the HEI module from the cart that works on the other cart? |
01-11-2021, 05:37 PM | #278 |
Not Yet Wild
Join Date: Feb 2017
Posts: 12
|
Re: Installing HEI Ignition on 3PG Carts
1993 ezgo 5 voltage at ignition coil no spark? Any suggestions welcome
|
03-02-2021, 01:55 PM | #279 |
Not Yet Wild
Join Date: Mar 2021
Location: Savannah Ga.
Posts: 5
|
Re: Installing HEI Ignition on 3PG Carts
On robin pre mci motor how do you handle two plugs assuming you want to upgrade coil? Will this DR100 operate two coils without failure and is there advantage to upgrading coil? If there in no benefit the I don't want to waste time with it.
Brian |
04-08-2021, 08:34 AM | #280 | |
Not Yet Wild
Join Date: Dec 2018
Posts: 34
|
Re: Installing HEI Ignition on 3PG Carts
Quote:
The Autozone to go with that DR100 is the Duralast C849. I installed one last night, and I'd say the spark is robust. This is on a spark tester: |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Top Notch Carts, Edinburgh, Indiana. Carts I've built. | Members Rides | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Installing a DCX 400 | Electric EZGO | |||
Carts, carts, carts!!!-'01 EZ GO-$1300.00!!?? | Golf Carts and Parts | |||
Installing Light Kit G16 | Gas Yamaha |