|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-24-2020, 01:17 PM | #1 |
Gone Wild
Join Date: Sep 2009
Location: WI
Posts: 157
|
G8 terminal locations on motor
I have a G8 that I just put a sr 48300 controller in -problem is that its going slow in forward and fast in reverse none of the wires are marked and the motor housing is so rusted I cant read the stampings. I need to switch the wires around at the motor to correct this but cant find any pics ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2020, 11:46 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G8 terminal locations on motor
Swap the 2 terminals that are closer to the end of the motor.
|
03-26-2020, 03:08 PM | #3 |
Not Yet Wild
Join Date: Dec 2019
Location: Lake Tapps
Posts: 21
|
Re: G8 terminal locations on motor
Here is a picture of my G8 motor
|
03-31-2020, 12:54 PM | #4 |
Gone Wild
Join Date: Sep 2009
Location: WI
Posts: 157
|
Re: G8 terminal locations on motor
Thank you that fixed it
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Broken Terminal Off Motor | Electric EZGO | |||
A2 Motor terminal HOT | Electric EZGO | |||
Motor Terminal Identification | Electric Club Car | |||
Motor terminal orientation | Electric EZGO | |||
DCS motor terminal numbers??? | Electric EZGO |