E 29 rear end welding spider gears 4 posi

[riojohn]

HI,

With welded spiders, your wheels cant turn at diff speeds as your turning.. So you kinda drag/slid one tire as you turn. You get bucking and tire squeal as you turn.. It can cause axles to break, and due to not unlocking it tends to push the car straight as you try to turn.


Thank you....

[scottyb]

Originally Posted by riojohn

HI,

With welded spiders, your wheels cant turn at diff speeds as your turning.. So you kinda drag/slid one tire as you turn. You get bucking and tire squeal as you turn.. It can cause axles to break, and due to not unlocking it tends to push the car straight as you try to turn.


Thank you....

Welcome John..... Your first post is a big miss...... Did you not read the first post in this thread?

[crash12888]

I don't have any pictures but the spider gears are hardened and need to be preheated before welding.
I've got an ATV solid axle under the back of my cart and unless you do a lot of asphalt or concrete driving there is very minimal drag issues with turning, wheel chirp or popping the tire off the rim which I've heard talk about before.
If done properly you will get years of service out of the rear.
Just get a winch for the front of your cart because you will get farther in the sippy hole before you get stuck!