|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-03-2009, 07:35 PM | #1 |
Not Yet Wild
Join Date: Sep 2008
Location: sanford,nc
Posts: 36
|
driven clutch for 1988 ezgo
Can anyone tell me how the driven clutch comes apart after you get set screw out? Does it slid off or does it screw off? Thanks Jackie
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2009, 08:17 AM | #2 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: driven clutch for 1988 ezgo
Drive Belt running from front to back......It's on a splined shaft and should slide off
|
12-06-2009, 09:27 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: driven clutch for 1988 ezgo
|
12-09-2009, 06:19 PM | #4 |
Not Yet Wild
Join Date: Sep 2008
Location: sanford,nc
Posts: 36
|
Re: driven clutch for 1988 ezgo
Guys,I figured it out ,what I needed to know was how to pull the driven clutch apart.After you get set screw out you need to put gear puller on clutch to pull it apart to replace spring,a 3 arm puller is what you need. I made a 3/8 spacer the od and id of stock spring,put spacer under spring,took a peice of 1/2 inch all thread about a foot long,put thur clutch assy.with 1/2 washers on each end then put 1/2 hex nuts on each end and tighten until clutch assy. was pulled by in place. Then reinstall set screw,ready to put back on cart. hope this helps someone along the way,if I can help you jusy let me know,Jackie
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1988 Ezgo Driven (secondary) Clutch Problem | Gas EZGO | |||
1988 EZ GO Driven Clutch | Gas EZGO | |||
WTB EZGO Driven Clutch | Golf Carts and Parts | |||
1988 gas ezgo secondery clutch | Golf Carts and Parts | |||
ezgo driven clutch | Gas EZGO |