|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-06-2013, 05:55 PM | #1 |
Not Yet Wild
Join Date: Dec 2013
Location: Tallahassee
Posts: 1
|
2007 xrt 810-Replacing coil/ignitor access frustration
How in the word do you get the flywheel cover off. Can't reach the bottom two bolts as the shroud is to close. Tried removing it and seem to be stuck on what is still holding it up. I assume there are two bolts on the back side and I can see, but can't access.
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-06-2013, 06:29 PM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 2007 xrt 810-Replacing coil/ignitor access frustration
It's definitely a fun one! (Being sarcastic!)
On my 07 Lynx (DS) I had to remove the 4 mounting bolts on the engine pan, and also remove the 4 nuts on the transaxle to engine studs, and slide the engine "cockeyed" to remove the fan shroud. Not the funnest, or easiest thing to do... but ya' gotta do, what ya' gotta do! |
|
|
Similar Threads | ||||
Thread | Forum | |||
wtb 84-91 ignitor coil | Golf Carts and Parts | |||
How to get to the Ignition Coil & Ignitor | Gas Club Car | |||
ignitor and coil symptoms | Gas Club Car | |||
Pulsar Coil and Ignitor | Gas EZGO | |||
Location of Ignitor/coil | Gas Club Car |