2007 club car precedent controller

[Dusty34d]

Needing to replace my controller on my club car, curtis 1510a-5251, been searching online for one and only have found the 350 amp one, do I need to do any other upgrades to use that controller?

07 precedent, 6 inch spindle lift Jakes, 22 inch tires, just painting the body now and will be ordering a rear seat kit next.

chad

[Gazoo]

See one of the sponsors for some help there, Scotty @ Carts Unlimited or Dave @ Revolution Golf Carts can help you out. An Alltrax controller would be a MUCH better bang for the buck.

[mrgolf]

I have the Curtis 350 amp and really like it. Just mounts like your old one and you are good to go.

[NoleFan4Ever]

Originally Posted by Dusty34d

Needing to replace my controller on my club car, curtis 1510a-5251, been searching online for one and only have found the 350 amp one, do I need to do any other upgrades to use that controller?

07 precedent, 6 inch spindle lift Jakes, 22 inch tires, just painting the body now and will be ordering a rear seat kit next.

chad

As Gazoo and mrgolf noted, both controllers will work, but decide based on cost and needs. Meaning if its a lot cheaper for the Curtis and you do not plan on upgrading more down the road, it is a good fit. If you plan on upgrading or want much more user control, then the Alltrax XCT300 will run you $395 from the site sponsors Gazoo noted above..... And with your IQ cart, the Alltrax tool kit will allow you to user customize the speed/torque ratios....

[Dusty34d]

New to this forum, will look those sponsors up and pry purchase the alltrax, local place has rebuilt curtis for 300 so seems new alltrax way to go

[Gazoo]

Originally Posted by Dusty34d

New to this forum, will look those sponsors up and pry purchase the alltrax, local place has rebuilt curtis for 300 so seems new alltrax way to go