|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
|
12-12-2009, 05:50 PM | #1 |
Not Yet Wild
Join Date: Jun 2009
Posts: 30
|
Help Needed 98 motor mount bolt size?
Hello All,
Picked up this 98 Ez-Go, it had a bit of a jerk when taking off - - I found that the front and rear motor mount bolts are missing out of the motor-all 4. Anyone know the correct bolt size, length and thread for the 4 bolts? Thanks in advance! |
12-12-2009, 08:04 PM | #2 |
Not Yet Wild
Join Date: Jun 2009
Posts: 30
|
Re: Help Needed 98 motor mount bolt size?
I know your thinking wtf- - so am I !
|
12-12-2009, 08:53 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Help Needed 98 motor mount bolt size?
I am thinking I took 4 out last week but I have never measured them? THey were a 5/8 head so maybe a 3/8 bolt, coarse thread (18-20)? I dunno if they are metric or ASE?
|
12-13-2009, 12:51 PM | #4 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Help Needed 98 motor mount bolt size?
They're 3/8-16, 1 1/2 or 2", flat washers and nyloc nuts. 9/16 wrenches
Should be able to pull one of the remaining bolts and measure length. |
12-13-2009, 01:09 PM | #5 |
Not Yet Wild
Join Date: Jun 2009
Posts: 30
|
Re: Help Needed 98 motor mount bolt size?
|
12-13-2009, 01:47 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Help Needed 98 motor mount bolt size?
I think the skid plate is an intregal part if the engine cradel support.... better check with MMT before you run it much and tear the motor in 2 somewhere
Keep us posted...... |
12-13-2009, 03:55 PM | #7 |
Not Yet Wild
Join Date: Jun 2009
Posts: 30
|
Re: Help Needed 98 motor mount bolt size?
Thanks all-- just dropped it off at local cart mechanic.
|
12-13-2009, 04:20 PM | #8 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Help Needed 98 motor mount bolt size?
Cart shop open on Sundays? Good move - Have them give it a good looksie
|
|
|
12-13-2009, 05:50 PM | #9 |
Not Yet Wild
Join Date: Jun 2009
Posts: 30
|
Re: Help Needed 98 motor mount bolt size?
|
12-23-2009, 12:30 PM | #10 |
Not Yet Wild
Join Date: Jun 2009
Posts: 30
|
Re: Help Needed 98 motor mount bolt size?
Update: the local mechanic pulled the motor, removed 2 broken bolts from the block, installed the skid plate portion of the cradle and all new bolts, adjusted the valves and linkages, new air-filter, fresh gas and she's good to go!
I appreciate the info everyone provided~ Time to start on the cosmetics! |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wheel bolt pattern size? | Electric Club Car | |||
Vanguard crank bolt size | Big Block Talk! | |||
What size thread for Primary Puller Bolt? | Gas Yamaha | |||
Briggs motor mount pic needed (for 93 ezgo marathon) | Big Block Talk! | |||
96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car |