|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-25-2020, 01:51 PM
|
#11 |
|
Not Yet Wild
Join Date: May 2020
Location: Nova Scotia, Canada
Posts: 25
|
Re: EZGO Marathon slow taking off and stops on any incline
I'm getting 0 ohms up too 6150 as I press the pedal in. I live in Nova scotia canada any recommendations on places too buy parts at a good price and what upgrades would you recommend if I have to replace the controller with out going overboard I'm hoping to not spend more then a 1000 dollars canadian thanks.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-25-2020, 02:28 PM
|
#12 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO Marathon slow taking off and stops on any incline
Probably needs a controller and a new solenoid wouldn't hurt.
I'd go with an Alltrax SR48x00 and comparable solenoid. I buy most of my stuff from: https://www.cartsunlimited.net/alltrax-sr-series--.html I'm not sure if he ships to Canada, or what the cost will be after VAT or whatever Ottawa calls armed robbery by the government these days. Also my try any of these guys: https://www.buggiesgonewild.com/site-sponsors.php |
|
|
|
|
05-25-2020, 02:54 PM
|
#13 |
|
Not Yet Wild
Join Date: May 2020
Location: Nova Scotia, Canada
Posts: 25
|
Re: EZGO Marathon slow taking off and stops on any incline
I'm going too replace all the cables and the solenoid and look around for a new controller thanks for the help. Also can that controller handle 48 volts aswell as 36, again just too have room to upgrade in the future. Would I have to upgrade the motor if I got a 48 volt solenoid and controller.
|
|
|
|
|
05-25-2020, 03:48 PM
|
#14 | |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO Marathon slow taking off and stops on any incline
Quote:
A MZJ400 Solenoid will work at 36V and 48V The stock motor will run better at 48V. I did cables, then controller/solenoid and then upped the battery pack voltage. |
|
|
|
|
|
05-25-2020, 03:56 PM
|
#15 |
|
Not Yet Wild
Join Date: May 2020
Location: Nova Scotia, Canada
Posts: 25
|
Re: EZGO Marathon slow taking off and stops on any incline
Alright dident know if it would take it because the motor tag only sais 36 volts 2 HP dident know what the extra voltage would do
|
|
|
|
|
05-25-2020, 04:01 PM
|
#16 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO Marathon slow taking off and stops on any incline
The motor's 2 HP rating is at 36V, it'll have ~2.7HP at 48V and run cooler.
|
|
|
|
|
05-25-2020, 04:05 PM
|
#17 |
|
Not Yet Wild
Join Date: May 2020
Location: Nova Scotia, Canada
Posts: 25
|
Re: EZGO Marathon slow taking off and stops on any incline
Alright I'm going to get a controller and solenoid that will work at 48 or 36 volts and when I get new batterys I'll get a 48 volt pack
|
|
|
|
|
05-25-2020, 05:37 PM
|
#18 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO Marathon slow taking off and stops on any incline
 |
|
|
|
|
| Tags |
| 1991, ezgo, hills, marathon |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Slow to start. Won't go up an incline. | Gas Club Car | |||
| 2012 48v Ezgo cart slow on incline | Electric EZGO | |||
| 2012 48V Ezgo Golf Cart Slow on Incline | Electric EZGO | |||
| Slow on an incline | Electric EZGO | |||
| Club Car gas DS stops running on a SIDE incline | Gas Club Car | |||
Linear Mode
