LED Taillights for EZGO S4

[EZ GO L4 Beach]

Originally Posted by kgsc

Part numbers I listed are for the 2014 and newer body txt. The guts from previous years will work

That's good info. Thanks!

[DanoHB]

I did this too. I had to take out the new LED lights and put in old housing. i have a new 2016 L6. Worked great. Just drill out the existing rivets and swap over with new screws. Came out AWESOME!!! I did LED whips in back and 2 LED lighters and headlight bulbs in front too.

[WVHarley]

Awesome job I may think about the LED lights. Did you have to change the flasher out for the turn signals? I also LIKE the cargo net what did you use for it?

[DanoHB]

Originally Posted by WVHarley

Awesome job I may think about the LED lights. Did you have to change the flasher out for the turn signals? I also LIKE the cargo net what did you use for it?

Thanks. Mine doesn't have the actual turn signals. They put it to look like they have it, but no bulb or flasher at all. That is a $350+ upgrade.

I used a motorcycle small bungee cargo net. Works great. I got the LED light bars from Amazon. Also did the rear back up lights connected to the rear back up alarm.

[WVHarley]

Great idea for the cargo net. I will have to check into that. My cart did not come with the turn signals when I bought it either, but EZGO had a 25% off sale on "cyber Monday" so I couldn't pass that up. That was one of my winter projects.

[DanoHB]

Originally Posted by WVHarley

Great idea for the cargo net. I will have to check into that. My cart did not come with the turn signals when I bought it either, but EZGO had a 25% off sale on "cyber Monday" so I couldn't pass that up. That was one of my winter projects.

Nice1 How much were they? I want them, but wife doesn't like the big stick on the steering wheel shaft. Trying to figure other alternatives.

[EZ GO L4 Beach]

Originally Posted by WVHarley

Awesome job I may think about the LED lights. Did you have to change the flasher out for the turn signals? I also LIKE the cargo net what did you use for it?

I have turn signals on mine, would it cause a problem with these tailights?

[EZ GO L4 Beach]

Originally Posted by DanoHB

I did this too. I had to take out the new LED lights and put in old housing. i have a new 2016 L6. Worked great. Just drill out the existing rivets and swap over with new screws. Came out AWESOME!!! I did LED whips in back and 2 LED lighters and headlight bulbs in front too.

Those taillights look great, nice job!

[DanoHB]

Originally Posted by EZ GO L4 Beach

I have turn signals on mine, would it cause a problem with these tailights?

No problem at all. Actually has the wire needed to make turn signals in it.

[EZ GO L4 Beach]

Originally Posted by DanoHB

No problem at all. Actually has the wire needed to make turn signals in it.

Awesome. I bought these and then realized they didn't fit, so I gave them to my neighbor who has a cart they would fit on. Kicking myself now. Thanks for the info.