|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-28-2017, 06:07 AM | #1 |
Not Yet Wild
Join Date: Jan 2017
Posts: 4
|
New Curtis controller installation
Just installed replacement Curtis 1204 410 controller as per original but after instal it is judderring and shooting of fast for a few mins and then completed stopping
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-28-2017, 12:09 PM | #2 |
Not Yet Wild
Join Date: Jan 2017
Posts: 4
|
Re: New Curtis controller installation
Would anybody have any suggestions as to what might be causing the problem ?
|
01-28-2017, 12:22 PM | #3 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: New Curtis controller installation
I'm not expert but when I replaced my speed control my batteries were a little low so it would buck when you hit the throttle quickly, until I charged up the batteries all of the way.
The new control would pull more power and hit the low limit cut off. It's a shot in the dark but are your batteries fully charged and in good Condition? |
01-28-2017, 12:53 PM | #4 |
Not Yet Wild
Join Date: Jan 2017
Posts: 4
|
Re: New Curtis controller installation
Thank you for the recommendation to be fair the batteries are probably due a change will give it a try
|
01-29-2017, 01:02 AM | #5 |
Not Yet Wild
Join Date: Jan 2017
Posts: 4
|
Re: New Curtis controller installation
I think I have the problem... wrong controller I have 5-0k and need the older model 0-5, does anybody know if Any way of changing the components on the cart to be able to get the 5-0k controller working ?
|
01-29-2017, 08:05 AM | #6 |
Gone Wild
Join Date: Nov 2016
Location: Wilmington NC USA
Posts: 268
|
Re: New Curtis controller installation
The new Curtis 1205m-5603 that I put in is programmable for the voltage and throttle type and a bunch of other things!
I looked at a pic of your control ant it has the program plug, look it up, if so most golf cart shops should have the box to program everything and switch the throttle input to what you need. Just Google it . |
Tags |
controller issue |
|
|
Similar Threads | ||||
Thread | Forum | |||
Speed after controller installation | Electric Club Car | |||
G29 Controller Installation | Electric Yamaha | |||
Curtis 500 Amp Controller | Electric Club Car | |||
alltrax controller installation help | Electric EZGO | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts |