|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
11-13-2018, 02:05 PM
|
#1 |
|
Gone Wild
Join Date: Mar 2018
Location: The Desert
Posts: 248
|
G1 volt gague hook up
I need advice as to what wire would be best to tap into to hook up a digital volt gague. I am adding some lights and a stereo and would like to monitor battery voltage. I would like it to display when the key is in foward. Any thoughts to this?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-13-2018, 02:15 PM
|
#2 |
|
Nincompoop village idiot
 Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: G1 volt gague hook up
Wire ground to negative battery terminal, and Power to the switched side of the key switch. Power flows from battery to key switch to pedal switch to solenoid. So if you get it on the "switched" side of the key switch you'll be fine.
|
|
|
|
|
11-13-2018, 03:06 PM
|
#3 |
|
Gone Wild
Join Date: Mar 2018
Location: The Desert
Posts: 248
|
Re: G1 volt gague hook up
Ok, so I can tap in between the key switch and pedal switch. Thank you!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| volt gague | Electric Club Car | |||
| LED digital volt meter hook up | Electric Club Car | |||
| Pot box hook up | Electric Club Car | |||
| Installing a battery gague | Melex | |||
| How to hook up 12volt charger with 36 volt charger to charge 48 volts | Electric EZGO | |||
Linear Mode
