2017 EFI Cart How to make it idle???

[4est224]

I have a 2017 club car gas with a 6” lift and 23” tires on 14’s. I adjusted the throttle cable to pick up a few rpms and mph and the cart runs great except the take off is jerky. I would like the cart to idle and not start and stop off the gas pedal as I use this cart for driving the dirt roads around the house. I have the kit (P/N: 28017) to make the older 2004 and up carts idle but the instructions are not correct per year model. Any one have any help or insight I’d greatly appreciate it. Thanks

[tomakazi]

Me too!

[tomakazi]

I'm thinking the stop feature is handled by the EFI controller but without a proper schematic I can't tell.

[tomakazi]

Finally found a schematic. Pull the cover off the gas and brake adjustment point.
Pull the plug off the gas pedal and remove the black/white wire and isolate it from touching ground. Fire it up and adjust the idle speed screw at the throttle body for a nice slow idle.
The cart will now idle with your foot off the gas pedal.
Now I just need to find out how to bypass the neutral lock out so it will start in run mode in neutral.

[tomakazi]

Originally Posted by tomakazi

Finally found a schematic. Pull the cover off the gas and brake adjustment point.
Pull the plug off the gas pedal and remove the black/white wire and isolate it from touching ground. Fire it up and adjust the idle speed screw at the throttle body for a nice slow idle.
The cart will now idle with your foot off the gas pedal.
Now I just need to find out how to bypass the neutral lock out so it will start in run mode in neutral.

Or you can just run the cart in service mode. I can't see a viable reason why you can't do this and if you have a beefier clutch spring and set your idle nice and low the tranny will shift back and forth no problem.