95 club car/ admiral motor 48 vlts

[captncoin]

the cart has two solenoids, the control module (brain) has a1,a2,f1,f2p,n. the motor has a1,a2,s1,s2. both sloenoids are currently closed all the time . no reverse buzzer noise. 48 volts at batterys. when i ck voltage at motor post they have 48 at a1&a2, 12v at s1&s2. no response from anything when i push down on acc. pedal. have ck the two fuses i have found. last wk we got what is supposed to be the right motor, it at least hs the speed sensor hook up.

[captncoin]

also, on the picture of wiring diagram. it is hard to tell about the position of the wires on the solenoid. and does the pic apply if it is a older model with no tow switch ? reason i ask is i am attempting to remove some of the extra wires on the solenoids. i have also uncovered some burnt wiring ( some repaired, some not ).

[cheapjeep2]

That motor is not compatible with that controller. The motor is a series unit and the controller is for SHUNT (or Regen) system. Trying to make them work together will most likely damage the controller (brain)