|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-23-2011, 09:53 PM | #1 |
Not Yet Wild
Join Date: Jul 2008
Location: Oak Harbor Ohio near Toledo Oh
Posts: 74
|
1996 ezgo DCS 36 volt
i have a ezgo dcs 36 volt im having problems figuring out. on the lift it goes forward and reverse but seems to be over rpm of most carts i have worked on.down on ground it wont go and a1 cable gets very hot i did get it to go by pushing cart once on road it felt like it was going 30 mph i have changed all componets controller ,pot,sol, all out of a running cart i changed motor but had to use the end with the brushes from the problem cart so this still could be a problem area. has anyone had a simular problem should i change motor and what years will work i have some older motors that will bolt up but wiring studs a1,a2 s1 s2 are a little diff thanks for any help Woody
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2011, 11:00 PM | #2 |
Gone Wild
Join Date: Jun 2010
Location: East Texas
Posts: 602
|
Re: 1996 ezgo DCS 36 volt
Try posting this in the EZGo forum and I bet you get better response.
|
05-25-2011, 12:48 AM | #3 |
Not Yet Wild
Join Date: Jul 2008
Location: Oak Harbor Ohio near Toledo Oh
Posts: 74
|
Re: 1996 ezgo DCS 36 volt
your right was in another forum for club car i was working on thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
just wondering how to put a 12 volt horn on a 36 volt ezgo cart | Electric EZGO | |||
1996 Club Car 48 volt Used Stock Controller | Golf Carts and Parts | |||
ezgo 36 volt charger min volt for charge? | Electric golf carts | |||
1996 48 volt won't run - solenoid or micro switch | Electric Club Car | |||
Battery/Volt Meter Recomedations for 1996 Medalist | Electric EZGO |