![]() |
![]() |
#1 |
Not Yet Wild
Join Date: Jun 2008
Posts: 15
|
![]() 2001 ez go 295 cc can the driven clutch be rebuilt. when climbing uphill should the belt ride back up pulley or stay all the way down in it?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
TOD WILD
Join Date: Nov 2007
Location: YUMA AZ
Posts: 666
|
![]() The answer is yes on both questions there is plastic ramps that wear
out and the spring can get weeker with use down here in arizona we replace the ramps and add a third more preload on the spring this helps stock engine carts with bigger tires this keeps it in low gear longer and comes back to low gear quicker when climbing.. If your going to atempt this yourself be careful when you pull the snap ring there will be some preload tension!!!!! |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Driven clutch problem | Gas EZGO | |||
How do I remove the driven clutch? | Gas EZGO | |||
Driven Clutch Spring Installation | Gas Club Car | |||
Modify Driven Clutch | Gas Yamaha | |||
need a good used driven clutch 94 up ezgo | Golf Carts and Parts |